HAHN-Louvre Windows Installation Instruction
28Pages

HAHN-Louvre Windows Installation Instruction Receipt of goods/ Handling / Installation HAHN-Louvre Window Installation Instruction

HAHN-Louvre Window Installation Instruction

A This Installation instruction is only part of the complete HAHN-Louvre-Window booklet. Please read all instructions in preparation carefully and make it available for all persons whom it does concern. We herewith advise that there may be limitations or abolition of warranty at inobservance of instruction. 2. Application according to regulations 3. Misuse of Louvre Windows 5. Power-operated windows, minimize of risks 7. Receipt of goods / Preparation for installation 7.1. Unloading and interim storage 8.3.1 Fixation by screwing through frames 8.3.2 Fixation by using fixing brackets 8.3.3...

2. Application / Use according to regulations HAHN Louvre windows are NSHEV-units (Natural Smoke and Heat Exhaust Ventilators), furthermore suitable for day-to-day-ventilation; made from aluminium extrusions (depending on unit type either thermal- or non thermal broken) with single- or insulated glazing. Units are produced for vertical installation. HAHN Louvre windows can be used wherever optimal ventilation, good use of daylight at best use of space is required. Due to its elegant optics HAHN Louvre windows are suitable for appealingly architectural design. Examples for use of louvre...

5. Power-operated windows, minimize of risks Depending on location of units in the building, considering the use of rooms and furthermore on control of units, a risk analysis based on the European directive on machinery has to be done proving whether further preventive action has to be taken at the Louvre Windows. We refer to information sheet no. 3 of the „ZVEI Fachverband Sicherheitssysteme, 60596 Frankfurt/Main“ Checklist for determination of Safety class Project Risk Analysis Post Code / Location: ___________ Safety class Project number: _______________ Client Name:...

Producer of window systemStamp/Date/SignatureStamp/Date/Signature Case-study installation situation Risk Risk classification parameters HAHN-Louvre Window Installation Instruction Rev.11 / Dec 2015 / Subject to alterations 6 of 28

6. Operating instructions HAHN Louvre Windows have movable blades. The side mounted, horizontally rotating blades are to be operated by hand or by motor power. The following instructions must be observed: ■ The operation may only be done by instructed persons ■ It must be ensured that a quarter rotation of the blades about the central axis is possible. The turning and closing range of louvre window is permanently kept free of any obstructions and objects ■ Louvre Windows are not suitable to hang on any objects. They should not be used as a stepladder or for supporting the body weight ■...

7. Receipt of goods / Preparations for installation 7.1 Unloading and interim storage The supplied HAHN Louvre Windows are packed vertically into wooden transport crates. These crates have to be off-loaded by suitable means, for instance by a fork lift with sufficient support to match weight of units. Transport crates need to be brought down carefully to ground level. Transport crates should never be stacked. Where packing cases are left on site there is the danger of condensate water entering the actuators which needs to be avoided at all costs. 7.2 Transport damages The next step is to...

7.4 Handling on site When windows have to be moved on site, louvres must be closed. The windows can be stored either on their ends or on their sides. It has to be avoided that the right angle construction of the ventilator gets disturbed by placing any force on it as this could lead to mechanical failure or breakage of glass. Windows should never be placed on their corners or taken apart. Handling of units with louvres closed only! Transport vertically or horizontally only! right right Do not place or transport on the corner! HAHN-Louvre Window Installation Instruction

8.0 Installation Units should be fixed according to the following instructions by qualified personnel so as to avoid any damage through incorrect installation. Motor types LAH 65 and LAH 65 K may only be uninstalled once you have checked with HAHN Lamellenfenster GmbH. 8.1 Correct support Before the window is actually installed into the opening, it is necessary to check that it will fit in, that is to say there is sufficient clearance around the ventilator so that the window can function and keep weather out in a correct manner. The Louvre Window has to be exactly positioned and packing...

8.2 Allignment It is necessary to align the window horizontally and vertically accurately to achieve correct function and tightness. The Louvre Window frames must be exactly parallel to each other. This is achieved by side mounted packing pieces. Once the unit has been fixed provisionally it is necessary to check the angles and make sure vent is perpendicular to all sides. Drawing A After installation, support and allignment of units the white distance shims will have to be removed so you can open the unit. Inaccurate installation can be seen at different gaps between louvre and vertical...

8.3 Fixation of HAHN Lamellenfenster GmbH Louvre Windows 8.3.1 Fixation by screwing through window frame Only use boreholes in from HAHN Lamellenfenster GmbH already made into the side frame profile (drawing below) Method of fixing: ■ Point of origin: HAHN Louvre Window is installed, packing pieces are fitted and window is secured _ ■ Open the unit to a maximum of 70° (this avoids linkage mechanism being damaged). /|\ Note: Actuator types LAH 65 and LAH 65K may only be removed once HAHN Lamellenfenster GmbH has approved this ■ Remove screws (Fig. A) : - at installation into wooden...

Example shown at TAIRMO/TAIRMO-Allglass 8.3.2 Fixation by using fixing brackets This type of fixing is used when fixing to brickwork. Plates are intended to be attached to the vertical frames with a spacing of 40-70 cm, depending on wind load. Preparation of fixing: Turn fixing brackets over through 90° (Fig A) and secure with second screw Have rawplug ready (not included into the delivery by HAHN Lamellenfenster GmbH) (Choice of rawplug has to be made during the planning process and depends on building situation, type of wall, wind loads etc. – necessary clearance between ventilator frame...