Silicon sealant V6DR FRflNCe v> TREMCO Joints batiment - Building joints Construction Products Croup VEDAFLEX SIL is a single component silicone sealant with reduced modulus of elasticity and neutral binding. It cures when in contact with atmospheric humidity and produces an extremely flexible and resistant rubber. It is non-corrosive and does not contain strong smell additives. VEDAFLEX SIL perfectly adheres on surfaces commonly used in the building industry : concrete, glass, aluminium, etc. • Watertightness of joint seals between concrete and structural carpentry • Windows sealing • Sealing of prefabricated concrete pieces • Waterproofing of curtain walls • All applications where inodorous mastic is needed TECHNICAL CHARACTERISTICS VEDAFLEX SIL is supplied in boxes of 24 x 300ml cartridges. It has a shelf-life of 12 months stored in a dry place between 5°C and 25°C. White, grey, brown, black, bronze, ivory. Substrates must be clean, free of dust, grease or any other material products according to the substrate. Some substrates may require a primer. If not sure, always proceed to a Do not paint Vedaflex SIL. that prevent adhesion of silicon. Use appropriate cleaning preliminary test. © All rights reserved - Non contractual drawings - 05/2025 20, Allee des Erables - Bat. E. - 93420 Villepinte - France Postal address

Joints batiment - Building joints Construction Products Croup According Annex III of the regulation (EU) N° 305/2011 1. Unique identification code of the product-type: 2. Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article 11(4): Vedaflexsil, batch number: see packaging of the product Sealant for fagade for interior and exterior application (intended for use in cold climates) EN 15651-1:2012 F-EXT-INT-CC 25LM Sealant used for sealing glazing applications (intended for use in cold climates) EN 15651-2 G-CC 25LM 4....

Joints batiment - Building joints Construction Products Croup Conditioning: Method A Substrate: Aluminium w/o Primer

Joints batiment - Building joints Construction Products Croup Conditioning: Method A Substrate: Aluminium w/o Primer NF = no failure according to ISO 11600 NPD = No performance declared This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: L. Rande, Technical Director According to Art. 6 (5) of the Regulation (EU) No. 305/2011 a Safety Data sheet according Regulation (EU) No. 1907/2006 (REACH), Annex II is available on the website to support this Declaration of Performance

Joints batiment - Building joints Construction Products Croup According Annex III of the regulation (EU) N° 305/2011 as it has effect in the United Kingdom in respect of Great Britain. 1. Unique identification code of the product-type: 2. Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article 11(4): Vedaflexsil, batch number: see packaging of the product Sealant for fagade for interior and exterior application (intended for use in cold climates) EN 15651-1:2012 F-EXT-INT-CC 25LM Sealant used for sealing glazing applications...

Joints batiment - Building joints Construction Products Croup Conditioning: Method A Substrate: Aluminium w/o Primer

Joints batiment - Building joints Construction Products Croup Conditioning: Method A Substrate: Aluminium w/o Primer NF = no failure according to ISO 11600 NPD = No performance declared This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: L. Rande, Technical Director According to Art. 6 (5) of the Regulation (EU) No. 305/2011 a Safety Data sheet according Regulation (EU) No. 1907/2006 (REACH), Annex II is available on the website to support this Declaration of Performance.