*myarchiexpo

Joint covers

Product catalog summary

Introduction
The document presents the clips affixed joint covers by GV2 VEDA France, designed to protect and conceal expansion joints in building structures. These covers are suitable for new and refurbishment projects across various building types, including offices, malls, schools, and more.

Materials and Models

Extruded Aluminium: Available for both exterior and interior use, made from 6063 T6 aluminium alloy with optional anodized or powder-coated finishes. Standard lengths are 3 meters, with widths ranging from 50 to 140 mm for flat models and 50 to 120 mm for angle models.
Extruded PVC: Available in white, cream, and grey, with standard lengths of 3 meters and widths of 50, 70, and 90 mm for both flat and angle models.
Extruded Brass: Available in a 90 mm wide flat model, with optional polishing.

Installation Procedure
The installation involves inserting a fastening clip, followed by the head of the next clip, and pushing firmly into the joint. The joint covers are then secured in place.

Choosing Joint Covers
Joint covers are selected based on the joint width, ranging from 20 to 120 mm, using specially developed spring clips. The covers are referenced as CJV for facades, walls, and ceilings, and CJH for light floors. Corner profiles have an 'A' suffix.

Fixing Clips
Specially designed stainless steel spring clips are used for affixing, available in four models for joint widths from 20 to 150 mm. These clips are patented and provide a secure fixing.

Folded Joint Covers
Used when clips affixed profiles cannot be installed, suitable for heavy-duty traffic floors, and available in various materials like galvanized steel and aluminium.

Clip Models

Clip S: For gaps 20 to 35 mm.
Clip SLL: For gaps 35 to 80 mm.
Clip XL: For gaps 60 to 110 mm.
Clip XXL: For gaps 100 to 150 mm.

All models are patented.

Catalog excerpts

Joint covers Presentation The clips affixed joint covers are designed to provide an attractive and decorative low cost solution to the problem of protecting and concealing expansion joints in the structure of a building. They are suitable for use in new and refurbishment projects for walls, ceilings and floors. CLIPS AFFIXED JOINT COVERS FOR STANDARD AND SEISMIC STRUCTURAL MOVEMENT JOINTS Extruded aluminium Fast and easy to install, the clips The extruded aluminium clips affixed joint covers can be used for exteriors and interiors. They are made of 6063 T6 aluminium alloy and can be finished with a 15 micron thick natural (colourless) anodizing layer. They are available from stock in 3 meter lengths in the following widths : affixed joint covers are produced in aluminium, PVC and brass extrusions. They will successfully span 1. Insert a fastening clip of buildings : office buildings, shopping malls and retail stores, schools, hospitals, hotels, blocks of flats, municipal buildings, 2. Insert head of the following clip alternatively leisure centres, factories, airport terminals, rail terminals, etc... Aluminium clips affixed joint covers can also be supplied powder-coated, upon request, in any RAL colour. All models can be supplied mill or anodized finished. Non standard lengths and drilled profiles can be supplied on special orders. Please contact us for quantities and conditions. Extruded PVC 3. Push firmly into joint The extruded PVC clips affixed joint covers can be used for exteriors and interiors. The colours white RAL 9016, cream RAL 1015 and grey RAL 7035 are available from stock in 3 meter lengths in 50, 70 and 90 mm wide, flat and angle models. Please contact us for any special model or colour. Extruded brass 4. Joint cover in place The extruded brass clips affixed joint covers are available from stock in 3 meter lengths in 90 mm wide, flat model only. Polishing can be made upon request. © All rights reserved - Non contractual drawings - 01/2025 Certified management system GV2 VEDA FRANCE 20, Allée des Erables - Bât E - 93420 Villepinte - France Postal Address CS 63052 - 95972 Roissy CDG Cedex

Open the catalog to page 1

How to choose a clips affixed joint cover Clip S : for structural gaps varying in width from 20 to 35 mm. Clip SLL *: for structural gaps varying in width from 35 to 80 mm. The extruded clips affixed joint covers successfully cover joints from 20 to 120 mm using specially developed spring clips. The flat joint covers for facades, walls and ceilings are referenced as CJV profiles. The flat joint covers referenced as CJH stand for light floors (pedestrian traffic). The number which follows the letters always indicates the width of the joint cover in mm. Corner profile have same references with...

Open the catalog to page 2

Joint covers

Joint covers

Catalog excerpts

All GV2 VEDA FRANCE catalogs and technical brochures