Joint covers
2Pages

{{requestButtons}}

Catalog excerpts

Joint covers - 1

Joint covers Presentation The clips affixed joint covers are designed to provide an attractive and decorative low cost solution to the problem of protecting and concealing expansion joints in the structure of a building. They are suitable for use in new and refurbishment projects for walls, ceilings and floors. CLIPS AFFIXED JOINT COVERS FOR STANDARD AND SEISMIC STRUCTURAL MOVEMENT JOINTS Extruded aluminium Fast and easy to install, the clips The extruded aluminium clips affixed joint covers can be used for exteriors and interiors. They are made of 6063 T6 aluminium alloy and can be finished with a 15 micron thick natural (colourless) anodizing layer. They are available from stock in 3 meter lengths in the following widths : affixed joint covers are produced in aluminium, PVC and brass extrusions. They will successfully span 1. Insert a fastening clip of buildings : office buildings, shopping malls and retail stores, schools, hospitals, hotels, blocks of flats, municipal buildings, 2. Insert head of the following clip alternatively leisure centres, factories, airport terminals, rail terminals, etc... Aluminium clips affixed joint covers can also be supplied powder-coated, upon request, in any RAL colour. All models can be supplied mill or anodized finished. Non standard lengths and drilled profiles can be supplied on special orders. Please contact us for quantities and conditions. Extruded PVC 3. Push firmly into joint The extruded PVC clips affixed joint covers can be used for exteriors and interiors. The colours white RAL 9016, cream RAL 1015 and grey RAL 7035 are available from stock in 3 meter lengths in 50, 70 and 90 mm wide, flat and angle models. Please contact us for any special model or colour. Extruded brass 4. Joint cover in place The extruded brass clips affixed joint covers are available from stock in 3 meter lengths in 90 mm wide, flat model only. Polishing can be made upon request. © All rights reserved - Non contractual drawings - 10/2023 Certified management system GV2 VEDA FRANCE 20, Allée des Erables - Bât E - 93420 Villepinte - France Postal Address CS 63052 - 95972 Roissy CDG Cedex

Open the catalog to page 1
Joint covers - 2

How to choose a clips affixed joint cover Clip S : for structural gaps varying in width from 10 to 35 mm. Clip SLL *: for structural gaps varying in width from 35 to 80 mm. The extruded clips affixed joint covers successfully cover joints from 10 to 120 mm using specially developed spring clips. The flat joint covers for facades, walls and ceilings are referenced as CJV profiles. The flat joint covers referenced as CJH stand for light floors (pedestrian traffic). The number which follows the letters always indicates the width of the joint cover in mm. Corner profile have same references...

Open the catalog to page 2

All GV2 VEDA FRANCE catalogs and technical brochures

  1. THE RANGE

    64 Pages

  2. JDH 6.11

    1 Pages