*myarchiexpo

JDH 6.35 A

Product catalog summary

Introduction
This document provides technical specifications for the JDH 6.35 A all-metal floor expansion joint, designed for both exterior and interior use. It is suitable for various finishes such as tiles, marble, natural stone, resin, and flexible floors, and is recommended for vertical differences up to 40mm.

Specifications

Material: Aluminium
Standard Length: 23 meters
Load-Bearing Capacity: Based on pneumatic wheel vehicles with a contact surface of 200x200mm
Vertical Movement Capacity: Up to 40mm

Product Variants
The JDH 6.35 series includes several models with varying gap widths (W) and heights (H), allowing for different movement capacities:

JDH 6.35-050 A: Gap 50mm, Height 6mm, Movement Capacity +65/-30mm
JDH 6.35-075 A: Gap 75mm, Height 9mm, Movement Capacity +80/-50mm
JDH 6.35-100 A: Gap 100mm, Height 12mm, Movement Capacity +100/-75mm
JDH 6.35-150 A: Gap 150mm, Height 12mm, Movement Capacity +100/-125mm
JDH 6.35-200 A: Gap 200mm, Height 13mm, Movement Capacity +100/-145mm
JDH 6.35-250 A: Gap 250mm, Height 15mm, Movement Capacity +125/-175mm
JDH 6.35-300 A: Gap 300mm, Movement Capacity +150/-215mm
JDH 6.35-400 A: Gap 400mm, Movement Capacity +200/-300mm

Additional Features

Available with an 8mm plate for pedestrian traffic
Plates can be striped or smooth depending on the model
Thickness can be adjusted in the factory based on load requirements

Recommendations
For technical recommendations on fixings, it is advised to contact the manufacturer directly.

Catalog excerpts

Joints batiment - Building joints O TREMCO Construction Products Croup Joint de dilatation de sol tout metal All metal floor expansion joint JDH 6.35 A avec differences de niveaux / with vertical differences *Selon les charges de votre projet les epaisseurs peuvent etre ajustees en usine. / *Depending on the required load bearing capacity the thickness of the product can be adjusted in factory. **Mouvements verticaux donnes pour un profile en position initiale. Mouvements uniquement dans un sens. / **Vertical movements given for a profile in the initial position. Movements only in one direction. ***Existe aussi avec plaque de 8 mm pour les trafics de pietons. / *™Also available with 8mm plate for pedestrian traffic. Fixations : nous consulter pour preconisation. / Fixings: please contact us for technical recommendation. Selon les modeles les plaques peuvent etres striees ou lisses. / Depending on the model, the plates can be striped or smooth. La capacite de charge est uniquement donnee pour un joint en position initiale. Les valeurs de charges indiquees sont basees sur des vehicules a roues pneumatiques dont la surface de contact est de 200x200 mm. / The load-bearing capacity is based on the initial position of the joint. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200mm. © Tous droits reserves - Dessins non contractuels - 09/2025 - © All rights reserved - Non contractual drawings - 09/2025 20, Allee des Erables - Bat. E - 93420 Villepinte - France Adresse postale / Postal address

Open the catalog to page 1

JDH 6.35 A

JDH 6.35 A

Catalog excerpts

All GV2 VEDA FRANCE catalogs and technical brochures