Folded joint covers Joints batiment - Building joints For gaps up to 500 mmSeries CJP The range of folded joint covers is designed to provide an attractive and decorative low cost solution to the problem of protecting and concealing expansion joints in the structure of a building. They are suitable for use in new or refurbishment projects for walls, ceilings and floors, for gaps up to 500 mm. They are available in aluminium, galvanized or stainless steel and brass and can be installed in all types of buildings : office buildings, shopping malls and retail stores, schools, hospitals, hotels, blocks of flats, municipal buildings, leisure centres, factories, airport terminals, rail terminals... Mill finish aluminium Anodized aluminium Powder coated aluminium (RAL colours) Galvanized steel © All rights reserved - Non contractual drawings - 09/2024 Bonding : silicon sealant, polyurethane, MS polymer Screws and plugs (contact us for specifications) VED POXY chemical sealing 20, Allee des Erables - Bat E - 93420 Villepinte - France Postal Address

Mousse amortissante Adhesive foam Mousse amortissante Adhesive foam W * Mousse amortissante fournie en option / Adhesive foam optional Standard drilling : Drilled on one side every 400 mm, first and last hole at 10 cm from each ends, i.e 7 holes per length of 3 meters. Drilling diameter 8 mm, countersunk 10 mm. Special drillings : Drilled on both sides, one standard hole on one side and one oblong hole on the other side in order to guide and to secure the joint during its movement. Drilled on both sides, oblong holes. Waterproofing and insulation : A special adhesive polyethylene type can be...