Catalogs >
GV2 VEDA FRANCE >
Control Joints - JF Luxe 2700

Control Joints - JF Luxe 2700
1Pages

Catalog excerpts

Joint de fractionnement Control joint Pose scellée / For bed affixed tiles Series JF Luxe 2700 Joints de fractionnement de sol de la série JF Luxe 2700 sont destinés à prévenir les désordres (décollements, fissurations) qui ne manquent pas de se produire lorsque des revêtements de sols sont posés en grande surface sans joint. Ils sont utilisés pour fractionner les revêtements de sols tels que carrelage, céramique, pierre naturelle, marbre, granit, revêtement coulé, etc. Les JF Luxe 2700 sont constitués de deux plats métalliques en aluminium, laiton ou inox reliés par une mousse adhésive compressible et d’un remplissage avec un mastic élastique neutre de grande qualité. Ce mastic est disponible dans plusieurs teintes est assure la finition et l’étanchéité du profilé. Series JF Luxe 2700 control joints are designed to prevent the malfunctions (cracks, de-bonding) that systematically occur when flooring systems are installed in large areas without joints. Series JF Luxe 2700 aluminium, brass or stainless steel movement control joints are designed to partition rigid floors such as ceramic tiles, marble, granite, natural stone, etc. They are made of two brass side plates bonded to a compressible adhesive foam and an elastomeric sealant. The Series JF Luxe 2700 aluminium, brass or stainless steel garantees a very high quality decorative and luxurious finish The stainless steel and brass side plates visible parts can be supplied either mill finish, satin finish or high gloss polished. The JF 2700/A (Aluminium) Grey insert Mouvements admissibles [mm] Movement capacity [mm] Couleurs de l’insert / Insert colors Mastic transparent, blanc, beige*, gris*, noir / Transparent sealant, white, beige*,grey*, black Matériaux / Materials Aluminium, laiton, inox / Aluminium, brass, stainless steel Longueur standard [ml] / Standard length [lm] *Variation de teintes disponibles / Colors variations available. Les produits d’entretien ne doivent en aucun cas contenir d’acide chlorhydrique ou fluorhydrique et ne doivent pas être abrasifs. / They can be cleaned using standard cleaning The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light products provided that they do not contain hydrochloric pneumatic wheels vehicles with a not abrasive. pedestrian traffic. The indicated load-bearing capacities are based on or hydrofluoric acids and arecontact surface of 200x200 mm. © All rights reserved - Non contractual drawings - 03/2023 Certified management system GV2 VEDA FRANCE 20, Allée des Erables - Bât. E - 93420 Villepinte - France Postal Address CS 63052 - 95972 Roissy CDG Cedex

Open the catalog to page 1

Control Joints - JF Luxe 2700 1Pages

Catalog excerpts

All GV2 VEDA FRANCE catalogs and technical brochures

Control Joints - JF Luxe 2700
1Pages