Clips affixed PVC joint covers S S Clip S* For structural gaps varying in width from 10 to 35 mm. Clip SLL* For structural gaps varying in width from 35 to 80 mm. Clip XL* For structural gaps varying in width from 60 to 110 mm. For structural gaps varying in width from 100 to 150 mm. * Patented models Initial joint width W [mm] Flat joint cover S [mm] Angle joint cover S [mm] Recommended clip Number of clips per 3 lm length Wall / Ceiling The colours white RAL 9016, cream RAL 1015 and grey RAL 7035 are available from stock in 3 meter lengths in 50, 70 and 90 mm wide, flat and angle models. In order to avoid possible mistakes, it is important to check that the selected models of joint covers and clips are adapted to the concerned situation on job site Technical characteristics Density Vicat Fusion point Tensile strength Ball hardness Water absorption Bending stress Notch impact strength at 23°C Linear tolerance Linear expansion coefficient Fire resistance The clips affixed PVC joint covers are made of non-recycled material, according to the latest available technology. They do not contain any lead, cadmium or formaldehyde and are suitable for exterior use. CERTIFICATIONS : PVC : manufactured in compliance with ISO 9001 Stainless steel clips : certifications ISO 14001 - ISO/TS 16949 - ISO 9001 © All rights reserved - Non contractual drawings - 01/2025 Certified management system GV2 VEDA FRANCE 20, Allée des Erables - Bât E - 93420 Villepinte - France Postal Address CS 63052 - 95972 Roissy CDG Cedex