Gunnebo GyroSec
12Pages

Gunnebo GyroSec Motorised security revolving door for internal/semi external installation GyroSec is a premium security product in the Gunnebo Turnstiles offering. It is an elegant design able to maintain visible the existing finished floor, offering a choice of security levels preventing tailgating and piggybacking. As option, is available a basic anti piggy backing APB providing an adequate compromise on performance and price, and also an advanced APB optional system for a greater performance and passage flow. It offers simultaneous authorised entry and exit and both directions are electronically controllable. On receiving a signal from the access control system or push button, the door wings rotate to allow authorised passages. Should the authorised user not use the first available sector, the GyroSec will allow valid entry through the next sector. GyroSec enforces both rejecting and alarming upon potential unauthorised use and avoids entrapment. GyroSec also prevents unauthorised passage from the opposite direction whilst a valid passage is being made in the other direction. This is achieved via sensors located in the ceiling that continuously monitor all door sector. Safety is guaranteed by adjustable torque sensing and safety egdes for the forward and reverse directions. Emergency wing break-out facility is available. GyroSec offers as standard a day-mode functionality selectable in entry or exit or both directions to leave a free passage and turn security to the highest degree when needed. All parameters and functionalities are programmable via a user friendly tablet interface. A complete list of accessories and options, includes manual or mothorised night shutters, and a wide selection of finishes and dimens

Technical Specifications Additional Interface Motorised security revolving door. Safety torque sensing. Logic voltage 24Vac. Momentary zero volt (0V) normally open (NO) signal is provided by either a card reader or push button input of duration between 0.5 and 1.0 seconds. The card reader inhibits, resets, and passage confirmation as standard. Frame and cornice: Embossed painted steel section powder coated finish RAL color 9006 Frame glazing: 11/12 mm laminated safety glass P4A BR1/S (in accordance with EN356-EN1063) Rotor wings: Aluminium frame, finish silver RAL 7040. 11/12 mm laminated...

SITE PREPARATION: GyroSec 2180 4 wings Product is delivered in a kit form and requires lifting equipment. Approx. Weight 1040 kg (for installation details, please refer to installation layout drawings) Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/-5mm over footprint area. Dimensions to be > 2250 x 2250 x 150 deep min. (units in mm).

SITE PREPARATION: GyroSec 2180 3 wings Product is delivered in a kit form and requires lifting equipment. Approx. Weight 1040kg (for installation details, please refer to installation layout drawings) Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/-5mm over footprint area. Dimensions to be >2250 x 2250 x 150 deep min. (units in mm).

SITE PREPARATION: GyroSec 2000 4 wings Product is delivered in a kit form and requires lifting equipment. Approx. Weight 920 kg (for installation details, please refer to installation layout drawings) Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/-5mm over footprint area. Dimensions to be > 2250 x 2250 x 150 deep min. (units in mm).

SITE PREPARATION: GyroSec 2000 3 wings Product is delivered in a kit form and requires lifting equipment. Approx. Weight 920 kg (for installation details, please refer to installation layout drawings) Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/-5mm over footprint area. Dimensions to be >2250 x 2250 x 150 deep min. (units in mm).

SITE PREPARATION: GyroSec 1800 4 wings Product is delivered in a kit form and requires lifting equipment. Approx. Weight 780 kg (for installation details, please refer to installation layout drawings) Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/-5mm over footprint area. Dimensions to be > 2050 x 2050 x 150 deep min. (units in mm).

SITE PREPARATION: GyroSec 1800 3 wings Product is delivered in a kit form and requires lifting equipment. Approx. Weight 780 kg (for installation details, please refer to installation layout drawings) Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/-5mm over footprint area. Dimensions to be > 2050 x 2050 x 150 deep min. (units in mm).

SITE PREPARATION: GyroSec 1600 4 wings Product is delivered in a kit form and requires lifting equipment. Approx. Weight 710 kg (for installation details, please refer to installation layout drawings)

SITE PREPARATION: GyroSec 1600 3 wings Product is delivered in a kit form and requires lifting equipment. Approx. Weight 710 kg (for installation details, please refer to installation layout drawings) Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/-5mm over footprint area. Dimensions to be > 1850 x 1850 x 150 deep min. (units in mm).

• Any horizontal pipe or conduit running below the GyroSec must be at least 140mm below FFL. • Metal conduit for cables should be raised at least 50mm from foundation. • It is the customer’s responsibility to ensure the structural integrity and strength of the installation location. • The dimensions given in this Product Data Sheet are for information only. In order to prepare the installation site, please refer to your usual Gunnebo Customer Service contact. Conditions of Use When using Gunnebo’s security access control gates, for security reasons, children must be supervised by an adult

Take advantage of our knowledge: www.gunnebo.com/Entrance-Control Design and production: Gunnebo. Photos Credits: Gunnebo. The data given in this material may be subject to change without further notice. The Gunnebo logos and “Gunnebo – For a safer world” are registered trademarks of Gunnebo AB.