Gunnebo GyroSec Motorised security revolving door for internal/semi external installation GyroSec is a premium security product in the Gunnebo Turnstiles offering. It is an elegant design able to maintain visible the existing finished floor, offering a choice of security levels preventing tailgating and piggybacking. As option, is available a basic anti piggy backing APB providing an adequate compromise on performance and price, and also an advanced APB optional system for a greater performance and passage flow. It offers simultaneous authorised entry and exit and both directions are electronically controllable. On receiving a signal from the access control system or push button, the door wings rotate to allow authorised passages. Should the authorised user not use the first available sector, the GyroSec will allow valid entry through the next sector. GyroSec enforces both rejecting and alarming upon potential unauthorised use and avoids entrapment. GyroSec also prevents unauthorised passage from the opposite direction whilst a valid passage is being made in the other direction. This is achieved via sensors located in the ceiling that continuously monitor all door sector. Safety is guaranteed by adjustable torque sensing and safety egdes for the forward and reverse directions. Emergency wing break-out facility is available. GyroSec offers as standard a day-mode functionality selectable in entry or exit or both directions to leave a free passage and turn security to the highest degree when needed. All parameters and functionalities are programmable via a user friendly tablet interface. A complete list of accessories and options, includes manual or mothorised night shutters, and a wide selection of finishes and dimensions.

Motorised security revolving door. Safety torque sensing. Logic Voltage 24V DC. Frame and cornice: Embossed painted steel section powder coated finish RAL color 9006 Frame glazing: 11/12 mm laminated safety glass P4A BR1/S (in accordance with EN356-EN1063) Rotor wings: Aluminium frame, finish silver RAL 7040. 11/12 mm laminated safety glass P4A BR1/S (in accordance with EN356-EN1063) - safety manifestations on moving glass wings Ceiling: Laminated HPL finished Pearl Grey Alternative finishes and materials Breakout wings External night automatic & manual version shutters Net height 2.3 - 2.5 [m]...

Technical specifications BR and FB are level only for ballistic resistance. Forced entry is RC level. GyroSec is available with certified BR6, RC3, RC4 and FB6 protection options, offering enhanced resistance against ballistic and forced entry threats. Ballistic Resistance GyroSec can be manufactured as BR6, tested and certified to EN 1063 standards. The ballistic resistant glass and materials ensure safety in high risk environments such as government buildings, critical infrastructure and financial institutions. Forced Entry Resistance RC3/RC4 versions tested in accordance with EN1627 combined...

Product is delivered in a kit form and requires lifting equipment. Approx. Weight 1040 kg (for installation details, please refer to installation layout drawings). Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/-5mm over footprint area. Dimensions to be > 2250 x 2250 x 150 deep min. (units in mm).

Product is delivered in a kit form and requires lifting equipment. Approx. Weight 1040 kg (for installation details, please refer to installation layout drawings). Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/-5mm over footprint area. Dimensions to be > 2250 x 2250 x 150 deep min. (units in mm).

Site preparation: GyroSec 2000 4 wings Product is delivered in a kit form and requires lifting equipment. Approx. Weight 1040 kg (for installation details, please refer to installation layout drawings). Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/-5mm over footprint area. Dimensions to be > 2250 x 2250 x 150 deep min. (units in mm).

Site preparation: GyroSec 2000 3 wings Product is delivered in a kit form and requires lifting equipment. Approx. Weight 1040 kg (for installation details, please refer to installation layout drawings). Concrete Base to specification at least (cube) 30N/mm2 of resistance. Base to be flat and level to +/-5mm over footprint area. Dimensions to be > 2250 x 2250 x 150 deep min. (units in mm).

• Any horizontal pipe or conduit running below the GyroSec must be at least 140mm below FFL. • Metal conduit for cables should be raised at least 50mm from foundation. • It is the customer’s responsibility to ensure the structural integrity and strength of the installation location. • The dimensions given in this Product Data Sheet are for information only. In order to prepare the installation site, please refer to your usual Gunnebo Customer Service contact. When using Gunnebo’s security access control gates, for security reasons, children must be supervised by an adult at all times.

Take advantage of our knowledge: www.gunneboentrancecontrol.com