ClearSec Manual Full-Height-Turnstile for Internal and Semi-External Installation* ClearSec is a robust and elegant full height tripod turnstile available in many configurations: from model T with full stainless steel construction, roof, glass panel infill, tubular rotor assembly with column in painted mild steel; further enhanced by a slatted acrylic rotor with column clad in stainless steel (model SL), up to model FP with polycarbonate full panel rotor wings and a pressure mat for unauthorised detection in the dead area. All models include direction red-green status lights. Delivered in a kit form, it is easily transported to the installation site. Available in single and double layout configurations. Available with three (120°) rotor elements for more passage clearance or four (90°) rotor elements for increased security. Passage in both directions is electronically controlled. ClearSec offers a standard electromechanical head to prevent two passages at one time, equipped with damper for a silent mechanism and smooth operation. In the event of an emergency or power-off scenario, the unit can be configured fail-safe i.e. rotor freely rotates or fail-lock i.e. rotor locks. This option is available either in one or both directions of passage. *Semi-external installation allowed for ClearSec T only, under canopy

Technical Specifications Drive Hand operated. Logic Voltage 24Vac Materials Casework: 304 grade grained stainless steel Glass Infill: 6.4mm 3ply laminated glass panels Rotor Arms(T / SL / FP): 316 grade satin polished stainless steel / 20mm-thick acrylic slats / Full length 9.5mm-thick solid polycarbonate panel Rotor Column (T / SL and FP):Tubular mild steel, painted textured polyester powder top coat, black RAL9005 / Clad in grained stainless steel 304 for models SL and FP Mechanism Electro-mechanical head mechanism: Positive action lock to prevent two passages...

Site Preparation: ClearSec Single Unit (S) Product delivered in kit form and requires lifting equipment. Approx. Weight 520Kg (For installation details, please referto installation layout drawings) ClearSec T/SL/FP-S Height Stainless steel ClearSec T Rotor ClearSec SL Rotor ClearSec FP Rotor Straight Mild steel black 20mm-thick Mild steel column, clad in 9.5mm-thick solid bar rotor painted column acrylic slot. grained stainless steel Polycarbonate panel Concrete Base to specification at least fck (cube) 300N/mmJ of resistance Base to be flat and level to t/-5min over footprint area. Dimensions...

Site Preparation: ClearSec Double Unit (D) Product delivered in kit form and requires lifting equipment. Approx. Weight 890Kg (For installation details, please refer to installation layout drawings) Mild steel black painted column Mild steel column, clad in grained stainless steel 9.5mm-thick solid Polycarbonate panel Concrete Base to specification at least fck (cube) 300N/mm² of resistance Base to be flat and level to +/- 5mm over footprint area. Dimensions to be > 1450 x 2500 x 150 deep min (units in mm)

Important Any horizontal pipe or conduit running below the ClearSec must be at least 140mm below FFL Metal conduit for cables should be raised at least 50mm from foundation It is the customer’s responsibility to ensure the structural integrity and strength of the installation location The dimensions given and the pictures shown in this Product Data Sheet are for information only. In order to prepare the installation site, please refer to your usual Gunnebo Customer Service contact For further information please contact: Competence Centre Entrance Control...