AutoSec
6Pages

AutoSec Motorised Security Revolving Door for Internal Installation AutoSec enforces both security and safety by rejecting and alarming upon potential unauthorized use and avoid entrapment. AutoSec prevents also unauthorised passage from the opposite direction whilst a valid passage is being made in the other direction. This is achieved via sensors located in the ceiling that continuously monitors all four door quadrants. Safety is ensured by adjustable torque sensing for the forward and reverse directions. Emergency wing break-out facility, night security external shutters and accessories complete the AutoSec range. AutoSec is a premium security product in Gunnebo Turnstiles offering. Transparent and elegant design offer a choice of security levels preventing tailgating and piggybacking. Simultaneous authorised entry and exit, both directions are electronically controllable. On receiving a signal from the access control system or push button on exit, the door wings rotate to allow authorised passages. Should the authorised user not use the first available quadrant the AutoSec will allow valid entry through the next quadrant.

AutoSec Technical Specifications Drive Motorised security revolving door. Safety torque sensing. Logic voltage 24Vac Materials Frame and cornice: Aluminium section powder coated finished silver RAL 9006 Frame glazing: 8.2mm 3 ply laminated safety glass Rotor wings: Aluminium frame finished silver RAL 9006, with 11.4mm 3 ply structural toughened and laminated safety glass Ceiling: Painted MDF finished silver RAL 9006 Walkway Down Lights 4N° recessed low voltages down lights are positioned within the ceiling over each quadrant Power Failure / Fire Alarm ...

AutoSec Site Preparation: AutoSec 2000 Product delivered in a kit form and requires lifting equipment. Approx. weight 720Kg (For installation details, please refer to installation layout drawings) Haake safety edge fitted as standard Fixed wing option framed 11.4mm toughened and laminated 3 ply Aluminium casework extrusion Breakout wing (option) Line of extended cornice for night shutters Draft excluder Night shutter (option) Curved 8.2mm 3 ply laminated casework glass Floor cable entry position (6 N°) with alternate route from the top of the unit Casework fixing positions drilled...

AutoSec Site Preparation: AutoSec 1850 Product delivered in a kit form and requires lifting equipment. Approx. weight 700Kg (For installation details, please refer to installation layout drawings) Haake safety edge fitted as standard Fixed wing option framed 11.4mm toughened and laminated 3 ply Aluminium casework extrusion Breakout wing (option) Line of extended cornice for night shutters Draft excluder Night shutter (option) Curved 8.2mm 3 ply laminated casework glass Floor cable entry position (6 N°) with alternate route from the top of the unit Casework fixing positions drilled during...

AutoSec Site Preparation: AutoSec 1700 Product delivered in a kit form and requires lifting equipment. Approx. weight 680Kg (For installation details, please refer to installation layout drawings) Haake safety edge fitted as standard Fixed wing option framed 11.4mm toughened and laminated 3 ply Aluminium casework extrusion Breakout wing (option) Line of extended cornice for night shutters Draft excluder Night shutter (option) Curved 8.2mm 3 ply laminated casework glass Floor cable entry position (6 N°) with alternate route from the top of the unit Casework fixing positions drilled during...

Important Any horizontal pipe or conduit running below the AutoSec must be at least 140mm below FFL Metal conduit for cables should be raised at least 50mm from foundation It is the customer’s responsibility to ensure the structural integrity and strength of the installation location Dimensions provided in this Product Data Sheet are for information only. In order to prepare the installation site, please refer to your usual Gunnebo Customer Service contact For further information please contact: Competence Centre Entrance Control c/o Gunnebo...