*myarchiexpo

816G

Product catalog summary

Overview: This document provides detailed specifications for the 816G Wheel Loader, highlighting its robust design suitable for tough environments.

Engine Specifications: The wheel loader is powered by a Yanmar 4TNV98 - ZPYW engine, compliant with Tier 3 / Stage IIIA emission regulations. It delivers a gross power of 50.2 kW (67 hp) and a net power of 47.8 kW (65 hp) at 2,400 rpm. The engine features a peak torque of 238 N•m at 1,600 rpm with a torque rise of 20% and has four cylinders with natural aspiration.

Transmission: The loader uses a counter shaft-type power shift transmission with a 3-element, single-stage torque converter. It offers a maximum travel speed of 25 km/h in both forward and reverse, with two speeds available in each direction.

Axles and Steering: Both front and rear differentials are conventional, with an axle oscillation of 11°. The steering is articulated with a relief pressure of 14.8 MPa.

Brakes: The service brakes are caliper dry disc type, actuated hydraulically, while the parking brake is a shoe/drum type, actuated mechanically.

Hydraulic System: The main pump is a gear type with a relief pressure of 18 MPa. The loader arm performance includes a raise time of 4.4 seconds, a dump time of 1.2 seconds, and a total cycle time of 8.6 seconds.

Loader Arm Performance: The tipping load is 4,895 kg straight and 4,180 kg at full turn. The bucket breakout force is 46 kN, with a maximum dump angle of 45±1° and a dump clearance of 2,283 mm.

Bucket Performance: The standard bucket size is 0.8 m3, with various rollback angles at different positions.

Dimensions: The loader measures 5,574 mm in length with the bucket down, 1,940 mm in width over tires, and has a wheelbase of 2,200 mm. The ground clearance is 285 mm, with a turning radius of 4,208 mm outside of the tire.

Tires: The tire size is 16 / 70 - 20.

Operating Weights: The operating weight of the loader is 5,600 kg.

Service Capacity: The fuel tank capacity is 95 L, engine oil is 10.2 L, cooling system is 14 L, hydraulic reservoir is 72 L, transmission and torque converter is 20 L, and each axle holds 9 L.

Contact Information: For more details, contact Guangxi Liugong Machinery Co., Ltd. at +86 772 3886124 or [email protected].

Catalog excerpts

Engine Yanmar 4TNV98 - ZPYW Standard Bucket Size 0.8 m3 Standard Breakout Force 46 kN Standard Dump Clearance 2,283 mm WHEEL LOADER

Open the catalog to page 1

ENGINE Emission Regulation Make Model Gross Power Net Power Peak Torque Torque Rise % Number of Cylinders Aspiration BUCKET PERFORMANCE Transmission Type Counter shaft-type power shift Torque Converter 3 element - single stage, single phase Maximum Travel Speed, fwd 25 km/h Maximum Travel Speed, rev 25 km/h Differential Front Type conventional Differential Rear Type conventional HYDRAULIC SYSTEM Main Pump Type gear Main Relief Pressure 18 MPa Float Down Time 3 s Fastest Total Cycle Time 8.6 s Guangxi Liugong Machinery Co., Ltd. 05/2014 Designed by LiuGong...

Open the catalog to page 2

All Guangxi Liugong Machinery Co. Ltd. catalogs and technical brochures

Archived catalogs

brochure 2016
8 Pages