Engine Specifications:
- Emission Regulation: Tier 3 / Stage IIIA
- Make: Yanmar
- Model: 4TNV98T-ZNLYS
- Gross Power: 61.3 kW (82.5 hp) @ 2,400 rpm
- Net Power: 57.3 kW (76.8 hp) @ 2,400 rpm
- Peak Torque: 293 N • m @ 1,550 rpm
- Number of Cylinders: 4
- Displacement: 3.3 L
- Cooling Type: Water

Electrical System:
- System Voltage: 12 V
- Alternator Output: 80 amps

Chain Tank:
- Drive Chain Size: 100 HS

Tires:
- Ply Type: Pneumatic
- Tire Size: 12 - 16.5
- Ply Rating: 10

Hydraulic System:
- System Type: Open
- Standard Flow: 84.3 L/min
- Optional High Flow: 122.1 L/min
- Traveling Hydrostatic Pressure: 32 MPa
- Working Hydrostatic Pressure: 20.7 MPa
- Hydraulic Cycle Time, Total: 8.4 s
- Raise: 4.1 s
- Dump: 2.1 s
- Lower (float down): 2.2 s

Operating Weight:
- 3,420 kg

Performance:
- Static Tipping Load: 1,910 kg
- Rated Load: 955 kg
- Boom Breakout Force: 22 kN
- Bucket Breakout Force: 25.5 kN
- Dump Clearance at Full Height Discharge: 2,425 mm
- Dump Reach at Full Height Discharge: 560 mm
- Maximum Dump Angle at Full Height: 39°
- Maximum Hinge Pin Height: 3,105 mm
- Bucket Rollback at Ground Level: 30°
- Ground Clearance: 210 mm
- Angle of Departure: 27°
- Front Clearance Radius: 2,000 mm

Service Capacities:
- Fuel Tank: 80 L
- Engine Oil: 10.4 L
- Cooling System: 20 L
- Hydraulic Reservoir: 56 L
- Hydraulic System Total: 60 L
- Chain Tanks, Each: 12 L

Optional Attachments:
- 4 in 1 Bucket – 0.4 m3 Auger
- Rocket Bucket – 0.4 m3 Cold Planer
- Scrap Bucket – 350 mm to 650 mm Snow Blade
- Hydraulic Hammer Pick - up Sweeper
- Fork Hydraulic Shear
- Lift Boom Trencher

Standard Equipment:
- General Bucket - 0.45 m3
- Control Safety Interlock
- Boom Interlock
- Quick Coupler
- Open ROPS / FOPS Cab
- Flow Standard – 84.3 L/min

Optional Equipment:
- Enclosed ROPS / FOPS Cab with AC
- Auxiliary High Flow – 122 L/min
- Solid Tire
- Tire Chains

Contact Information:
- Address: No. 1 Liutai Road, Liuzhou, Guangxi, PR China, 545007
- Phone: +86 772 3886124
- Email: [email protected]
- Website: www.liugong.com

Note: Specifications and designs are subject to change without notice. Machines shown may include optional equipment.