pegoland-profesional-flex-c2-te-s1-ww-en-2021-03
4Pages

PEGOLAND® PROFESIONAL FLEX GlobalEPD O "T O "T CD DESCRIPTION COMPOSITION FEATURES AND APPLICATIONS SUBSTRATES Cementitious adhesive made with mixed bonding agents, high flexibility and bonding strength, non slip and extended open time. Suitable for exterior and interior pavements and claddings. Particularly suitable for bonding fagades, large flooring areas and floors with underfloor heating. Suitable for plaster or anhydrite substrates. Product based on high resistance cement, selected aggregates, additives and synthetic resins that guarantee a high bonding strength, workability and resistance to ageing. • Excellent workability and great whiteness. • Rheologically improved with high stability and excellent performance. • Creamy texture, high thixotropy. • Technologically advanced, compatible with a large variety of substrates. • Stable in a wide range of mixing methods. • High thixotropic efficiency, improved convenience and lesser effort. • Suitable for both indoor and outdoor applications. Fagades. • Bonds to all sorts of ceramic tiles, porcelain, marble, granite and natural stone. • Fixing of tiles over cementitious waterproofing from MORCEMDRY range of products. • Avoids having to dampen the tiles or substrates thanks to its high water retaining performance. • Can be applied in thicknesses up to 15 mm. • High resistance to sagging. Excellent initial adhesion. • Extended open time, allows for the repositioning of tiles. • Deformable. Type S1. Complies with standard UNE EN 12002. • High wetting capacity. • Adhesion of large format pieces. • Bonding of large surfaces with heavy traffic, floors with under floor heating, refrigerated chambers and overlays. • Swimming pool coverings. Suitable for immersion. • Conventional cement-based, plaster or anhydrite substrates without priming being required. • Over any type of plasterboard laminate partitioning (PBL), large format clay brick, concrete, cellular concrete, fibre-cement, plasterbricks, mortars and self-levelling pastes, • Floor coverings such as marble, granite, terrazzo, natural stone and all types of tiles. • Substrates must be resistant, stable, sound and clean, free of dust, demolding agents, organic products, etc. • Do not apply on painted surfaces. • All substrates must have the appropriate flatness (maximum deviation tolerance of ±3 mm measured under a 2 metre ruler). If not, a screed should be made using the same product up to a maximum of 5 mm

INSTRUCTIONS FOR USE NOTCHED-TROWEL PANEL PEGOLAND® PROFESIONAL flex at least 48 hours prior to bonding. For a larger thickness use: ° On screeds: NIVELAND 10R or PAVILAND RECRECIDO AUTONIVELANTE, according to substrate and requirements. o On facings: levelling mortars with appropriate tensile strength and curing retraction already finished. • In case of hot or windy weather conditions or when applying over absorbent substrates, it is advisable to wet the substrate and wait till the thin layer of water disappears. • In exterior pavements, the support must have a slope equal or more than 1%....

PACKAGING TECHNICAL DATA ADHESJVE^^^™^^— PEGOLAND® PROFESIONAL flex • The water-tightness of a swimming pool must be ensured before using the product on it. • For elements reinforced with fibreglass meshing on the back, please consult our technical department. • For slate use PEGOLAND® PROFESSIONAL FLEX ELITE C2 TE S2 or PEGOLAND® FLEX RECORD. • Anhydrite screeds must be completely dry (maximum residual humidity 0, 5%), hard enough and free from any superficial dust or grout, which must be eliminated by sanding. • On ceramic floors (overlapping), remove the pieces that are badly adhered and...

The instructions for use are given according to our tests and knowledge and do not imply any commitment by GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability. GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly...