morcem-color-ultra-ww-en-2020-03
4Pages

GROUTING MORTARS MORCEM®COLOR ULTRA High performance fast-setting and fast-hardening grouting mortar for joints from 2 to 20 mm. High performance coloured grouting mortar with additives and anti-fungi/anti-algae properties. Fast-setting and fast-hardening, anti-efflorescences and water repellent grout mortar with great plasticity for the sealing of joints from 2 to 20 mm. Highly recommended for areas where the applied product is required to be quickly ready to use and ready for traffic. All type of ceramic pieces grouting in intense traffic areas, swimmingpools, floors with radiant heating systems and for its application in areas prone to the growth of microorganism. Product based on especial agglomerates (it does not contain portland cement), pigments and special additives. high purity aggregates, Grouting mortar for pavements and claddings; for interior and exterior areas; suitable for all type of ceramics, porcelain clay tiles, marble, granite, vitreous mosaic and natural stone. Highly recommended for areas where the applied product is required to be quickly ready to use and ready for traffic.Suitable for intense traffic and residential areas, swimming-pools, façades, balconies, terraces and radiant heating floors. Aquastop effect: It repels superficial water from the joints producing a pearl effect, the surface, with a very low porosity and minimum water absorption, makes the joint very easy to clean. Bioactive technology: Avoids micro-organisms proliferation(fungi and algae) in humid environments. Fast and easy to clean during its application with an optimum and fast finish. Resistant to cracking and fissures due to its low retraction and great durability against abrasion and mechanic resistance even during frosting/defrosting processes. Uniform colours, thanks to its saline efflorescenses blocking technology. It does not contain any Portland cements and therefore when it comes to the moisturising of the product, it does not produce any calcium hydroxide which leads to efflorescences, avoiding this unwanted effect in the colour and finish of the joint. Colours resistant to UV rays and exterior exposure. Good resistance against oils, solvents, alkalis and pH>3 acids. Before applying the grouting, make sure the adhesive is completely hard, taking into account that given timings in the data sheet have passed. Empty joints must be dry and clean, without dust or any other adhesive rest; they should have a uniform depth, 2/3 minimum from the total thickness. Some ceramic tiles may show sings of micro-porous or roughness in the surface area. It is advisable to carry out a preliminary test in order to verify that it can be cleaned and, when necessary, apply Rev. 2020_03 · This revision cancels all previous ones. Please, obtain the latest version from our web site · www.grupopuma.com · (+34) 957 76 40 40

PROTECMOR (temporary pore sealer) , on top of the surface avoiding any possible stains of pigment from penetrating the porosity of the surface in the tiles. Add water (23%- 27%) and mix it manually or mechanically with a spiral mixer at low revs (400 rev/min aprox.) until getting a consistent paste (not a liquid one), homogeneous and without lumps. Let the mixture rest for 2 minutes and mix again. As we are working with a fast drying grouting we should take into account that the amount mixed should be the adequate to be used within 20-25 minutes. Fill the joints using a rubber trowel and...

MORCEM®COLOR ultra CONSUMPTION ACCORDING TO DIMENSIONS (KG/M2) PACKAGING TECHNICAL DATA Valid values for 6mm thickness pieces. ((A+B)/AxB) x C x D x 0,17 = Kg/m2 Where: A= width of the tile (cm) B= length of the tile (cm) C= thickness of the (cm) D= width of the joint (cm) 5 Kg polyethylene bags. Shelf life: 2 years (5 Kg plyethylene bags) in its sealed original packaging, sheltered from weather conditions and humidity. (Statistic results obtained under standard conditions, at +23°C and 50% H.R) Classification according to UNE-EN 13888 CG2 A W Aspect Application temperature Mix duration...

MORCEM®COLOR ultra NOTE The instructions for use are given according to our tests and knowledge and do not imply any commitment by GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability. GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively...