Topciment 2020
52Pages

David Grille. A Coruña. Spain It´s not microcement, it´s Topciment®.

INDEX Jarkov. The ЦEX. Design by O.S.A. Ukraine

topciment 2 microcement 7 pigments 19 primers 29 sealers 33 maintenance 37 tools 41

The origins of Topciment stem from a challenge posed in 2005 by its founder, Pierre Ortais: combine quality, ease of application and a unique finish in a single product. The specialisation and experience in decorative coatings he brought to the game has made us a key player in the sector. Our philosophy is clearly defined by the continuous improvement of our products. Every day we overcome challenges, achieve goals and set new objectives. Our future and our coatings have one thing in common: they have no limits.

The main aim is to develop the best product, without skimping on the Latest generation additives or raw materials of the finest quality possidle. We produce our microcements using quartz instead of cardonates, This material is a thousand times harder and more resistant, In addition, we use complex sifting processes that are deyond the reach of just any company,

As an extra service we can arrange the transport, which is as important to us as to our customers. Our stock capacity enables us to prepare orders in under 24 hours and have them reach their destination in the Least possible time, Thanks to this logistical coordination, we export our products to over 50 countries,

as applicators, which has enabled us to train professionals who care about the products and always look tor the best application. We give training courses where we teach the application technique and certify our applicators, Furthermore, those people who Follow our tull application method benefit from up to 10 years1 guarantee on our products, Behind a quality product there is a great team. Our international team oF 30 persons in responsible Form the control oF the raw materials to the resolution oF any doubt during the application. We have a customer service centre and expert technical...

Freddo. Chernigof. Ukraine

Microcement is a continuous coating ideal for any room in your home and even in swimming pools. Its artisan application assures a unique and exclusive result.

Good flexibility: Topciment® microcements do not crack, even on old substrates such as historical buildings. Adherence to the existing substrate by two-component microcements is better than in those mixed only with water only,

The base coat for a correct application or to create a rustic effect. Traditional microcement, smooth, fine and elegant. Coating for surfaces in continuous contact with water.

MICROBASE Microbase has two usages or applications: as a base and as a finish. It is mainly used as the basis to prepare the surface to be worked. It covers the mesh and gives strength and hardness to the coating, which is then finished with Microfino, Microdeck or Microstone. If we apply Microbase as a finish, the space will get a rustic look, with an irregular and handmade texture. Maximum size of the aggregates: 0,4 mm Packaging Flexural strength: 10 N/mm2 (28 days). Compressive strength: 45 N/mm2 (28 days). Mixing Ratio > 10 kg powder – 3,00 l Acricem Resin Fire resistance: BFL s1...

Maximum size of the aggregates: 0,5 mm Maximum size of the aggregates: 0,6 mm Mixing Ratio Mixing Ratio > 10 kg powder XL– 3,00 l Acricem Resin > 10 kg powder XXL– 2,50 l Acricem Resin > Microbase XL(1 coat) – 1,40 kg/m² > Microbase XXL (1 coat) – 1,70 kg/m² The_Ply. Outstaff. Moscow.

MICRODECK Microdeck is the most suitable microcement for interior floors since it withstands intense traffic very well, due to its hard finish and great resistance to abrasion. It allows for open and seamless spaces, which are easy to clean and maintain. Flexural strength: 10 N/mm2 (28 days). Compressive strength: 35 N/mm2 (28 days). Conkreto Inc. Sabal Palm Road. Miami. USA

Maximum size of the aggregates: 0,2 mm Maximum size of the aggregates: 0,3 mm Mixing Ratio Mixing Ratio > 10 kg powder – 3,00 to 3,50 l Acricem Resin > 10 kg powder – 3,00 to 3,50 l Acricem Resin > Microdeck M (2 coats) – 1,00 kg/m² > Microdeck L (2 coats) – 1,00 kg/m² Top Cement Danmark. Copenhague.

The ideal microcement for walls. It is designed solely for vertical and non-traffic horizontal surfaces. Its finish is pleasant, silky and smooth to the touch thanks to its fine-grain texture. It creates a very popular and desired effect in the material. Maximum size of the aggregates: 0,125 mm Packaging Flexural strength: 7 N/mm2 (28 days). Compressive strength: 22 N/mm2 (28 days). Mixing Ratio > 10 kg powder – 4,50 l Acricem Resin Fire resistance: BFL d0 Consumption > Microfino (2 coats) – 0,50 kg/m² Showroom Topcreation. Rome. Italy

The most recommended microcement for outdoors thanks to its non-slip properties and its high levels of resistance. It is usually applied in terraces and porches, but can also be applied on façades for its aesthetic finish. Maximum size of the aggregates: 0,4 mm Flexural strength: 11 N/mm2 (28 days). Compressive strength: 0 N/mm2 (28 days). Mixing Ratio > 10 kg powder – 2,70 l Acricem Resin Consumption > Microstone (2 coats) – 2,00 kg/m² David Grille. A Coruña. S

Microcement of preparation, which can also be used as a final coat if its aesthetic finish is the one desired. Its texture is rough and nonslip. Ideal for swimming pool surrounds. A finishing microcement to apply over Aquaciment XL. A medium-grain texture. Ideal for the inside of swimming pools, providing a smooth finish that is pleasant to the touch. Mixing Ratio Mixing Ratio > 10 kg powder XL– 2,50 l Acricem Resin > 10 kg powder M – 3,00 l Acricem Resin > Aquaciment XL (2 coats) – 3,00 kg/m² Topciment Valencia. L’Eliana. Spain

Acrylic water based resin to prepare twocomponent Topciment® microcement mortars. It can also be used as a primer on cement-based substrates. Packaging > Acricem 5 l > Acricem 25 l Consumption as a primer > Acricem (1 coat) – 0,10 l/m²