BIKE LANE SEPARATOR Certified product TOTAL FLEXIBLE POLYURETHANE Mod. C-430-TPU ENVIRONMENTAL ADVANTAGES With each unit we avoid emitting 11,9 kg of CO2 into the atmosphere. “Skate green” allows to further reduce the carbon footprint. It is made with a mix of post-production and post-consumption PVC, with light organic polymers. DESIGN Body, with reflective areas, low relief to reduce the wear. “SKATE” is part of a European project, “Life Future”, which provides a valuable tool to quantify our contribution in the mitigation of Climate Change. OPTIONS Template to facilitate the maintenance operation. The anchor holes, are hidden by plugs inserted after the installation (Sold separately). SECURITY Higher reflecting rate, absence of impact angle less than 50º. Optimal separation from 1,3 to maximum 2,3 m. MAINTENANCE It should be repainted periodically, when the reflective paint is not visible. INSTALLATION MANUAL The reflective area, is below the separator body of the lane, to avoid premature friction wear. DECELERATOR RE-1 Reduced Weight. Easy manipulation and installation. Made with recycled materials. Completely recyclable. Wide and smooth surface, where the cyclist can support its foot in a stable way, to avoid accidents. Ready to install by means of anchor plugs. The holes can be made without moving the lane separator. Franjas laterales reflectantes. Chemical plug. HILTI-HI-170 - Sika Anchorfix-1 Anchor plugs. INOX A4 HIT-V-M12x150 mm - WS 9350 12x160 mm PARQUES Y JARDINES FÁBREGAS Gran Bretanya, 41 (Pol. Ind. Les Comes) 08700 Igualada · BARCELONA (SPAIN) Tel. +34 93 805 11 25 Fax +34 93 803 27 31

TOTALFLEXIBLE MODEL A-LOOP-G Bike lane separator with upper reflective detachable painted. 820 x 200 x 130 mm POLYURETHANE > Mod. C-430-TPU PLUS It overcomes a flex of 1500 cycles at 45° and 50 cycles at 90°, without damages (Report 16-31705992 issued by LGAI Technological Center). Classification "E" of fire behaviour, according to UNE-EN 13501- 1:2007+A1:2010, and test according to UNE-EN 13238:2011 (Report 16/13069-1884 part 1 and 2 by LGAI Technological Center). Resistant to -50° according to UNE ISO 182 (Report 16/31707091 by LGAI Technological Center). In accordance with UNE EN 1176/1:2009...