TeboProfil
2Pages

Base board: throughout Okoume plywood produced from severely selected veneers Faces (IAW EN 635-2): II / III Further processing of the face side: U Groove Finishing: sanded 2 sides Further processing of the edges: Shiplapped Further processing profile (10 mm) 6.5 Wall cladding, gables, roof ends and attics, finishing of eaves, garage doors, wooden structures. Average density (IAW EN 323): 500 kg/m3 (+/- 10%) Bonding (IAW EN 314-2): class 3 Service (IAW EN 636): class 3 exterior conditions Formaldehyde release classification (IAW EN 13986): E1 Content of Pentachlorophenol (IAW EN 13986): PCP ≈ 0 ppm Sizes, number of plies & packaging Thicknesses (mm) 15 (7) Other sizes & thicknesses: on request Preservative treatments, fungicide & Insecticide, antitermite: optional on request Cutting & TG processing: optional on request Flat, on intermediate bearers, in an enclosed dry and ventilated building, clear of the ground. As far as storage on site is concerned, provision should be made to cover the panels with an opaque waterproof sheeting with the underside of the stacks clear of the ground. FURTHER PROCESSING & INSTALLATION Compliance with standard practice, with regulations and with health and safety rules should be maintained at all times. Cutting and machining in the workshop possible except laser technology . Production on Thébault’s sites in France PRODUCTION SITES Groupe THEBAULT 47, rue des Fontenelles - 79 460 MAGNE - France Tél : +33 (0)5 49 35 70 20 info@groupe-thebault.com DESCR IPTION

TECHNICAL PROPERTIES Applications Conditions corresponding to service class 2 of ENV 1995-1-1 which is characterised by a moisture content in the material corresponding to a temperature of 20 °C and a relative humidity of the surrounding air only exceeding 85 % for a few weeks per year Humid conditions Conditions corresponding to service class 3 of ENV 1995-1-1 which is characterised by climatic conditions leading to higher moisture contents than in service class 2 External Conditions Nail and screw holding (t = 15 mm) Nail Face and edge: 300 N Face 1450 N Sound absorption coefficient...