DESCR IPTION Base board: Maritime Pine throughout Plywood Faces (IAW EN 635-3): III / III Face side III Admitting open defects Finishing: unsanded 2 sides Average density (IAW EN 323): 580 kg/m3 (+/- 10%) Bonding (IAW EN 314-2): class 3 Service (IAW EN 636): class 1-2-3 (interior, humid and exterior conditions) - flooring & roofing IAW EN 12871 Formaldehyde release classification (IAW EN 13986): E1 Content of Pentachlorophenol (IAW EN 13986): PCP ≈ 0 ppm Sizes, number of plies & packaging Thicknesses (mm) Other sizes & thicknesses: on request Preservative treatments, fungicide & Insecticide, antitermite: optional on request Cutting & TG processing: optional on request Flat, on intermediate bearers, in an enclosed dry and ventilated building, clear of the ground. As far as storage on site is concerned, provision should be made to cover the panels with an opaque waterproof sheeting with the underside of the stacks clear of the ground. FURTHER PROCESSING & INSTALLATION Compliance with standard practice, with regulations and with health and safety rules should be maintained at all times. Cutting and machining in the workshop possible except laser technology. Production on Thébault’s sites in France PRODUCTION SITES Admitting open defects All timber frame applications requiring a compatible size in wooden modular constructions and where strength and durability are a priority. TeboPin Wall Sheathing

TECHNICAL PROPERTIES Characteristic values (MPA) IAW EN 789 - 1058 for structural calculations IAW Eurocodes 9 Modulus of elasticity planar shear(Gr) Bending Strength panel shear (fv) Modulus of elasticity panel shear (GV) Bending Strength planar shear (fr) Available on DOP - Strength in: Tension (ft), Compression (fc), Bending (fm) Modulus of elasticity in: Tension (Et), Compression (Ec), Bending (Em) Others characteristic values Uses Use in structural applications (IAW EN 13986, IAW EN 12871, 636-3, EN 636-2, EN 636-1) Suitable for use as structural element in exterior conditions (service class...