Tebo Pin Flam
3Pages

DESCR IPTION Base board: Maritime Pine throughout fire -retardant Plywood Fire reaction classification: B-s2, d0 IAW EN 13501-1 Flooring application correspondence: Bfl-s2 Faces (IAW EN 635-3): I+ / II Face side I+ Tight without knots with wooden patches (maxi 2/m² = 7 per sheet) Tight with sound knots and wooden patches. Occasional synthetic repairs. Internal fittings in public access buildings. All constructions subject to specific fire regulations. Finishing: sanded 2 side Average density (IAW EN 323): 580 kg/m3 (+/- 10%) Bonding (IAW EN 314-2): class 3 Service (IAW EN 636): class 3 exterior conditions Formaldehyde release classification (IAW EN 13986): E1 Content of Pentachlorophenol (IAW EN 13986): PCP ≈ 0 ppm Sizes, number of plies & packaging Thicknesses (mm) Other sizes & thicknesses: on request Preservative treatments, fungicide & Insecticide, antitermite: optional on request Cutting & TG processing: optional on request Flat, on intermediate bearers, in an enclosed dry and ventilated building, clear of the ground. As far as storage on site is concerned, provision should be made to cover the panels with an opaque waterproof sheeting with the underside of the stacks clear of the ground. FURTHER PROCESSING & INSTALLATION Production on Thébault’s sites in France PRODUCTION SITES Compliance with standard practice, with regulations and with health and safety rules should be maintained at all times. Cutting and machining in the workshop possible except laser technology. TeboPin Flam

TECHNICAL PROPERTIES Characteristic values (MPA) IAW EN 789 - 1058 for structural calculations IAW Eurocodes 10 Available on DOP Strength in: Tension (ft), Compression (fc), Panel shear (fv) and Planar shear(fr) Modulus of elasticity in: Tension (Et), Compression (Ec), Panel shear (Gv) and planar shear (Gr) Others characteristic values Uses Use in structural applications (IAW EN 13986, EN 636-3, EN 636-2, EN 636-1) Suitable for use as structural element in exterior conditions (service class 3), humid conditions (service class 2) and interior conditions (service class 1) Bending radius (mm)...

TeboPin Flam PRECAUTIONS OF USE All further working operations performed on the product after delivery which may modify the fire reaction classification are carried out under the liability of the buyer or of the end user. The panels contain crystalline fire –resistant additives which may migrate to the surface and create chalky, powdery areas. This will not affect the mechanical or fire-resistance properties of the panels. These additives will also increase the hygroscopicity of the panels. Whatever type of surface finishing you wish to apply on to the plywood it is important to: 1-...