SmartSteam100 - Model SSB-3E/EF
2Pages

PROJECT NAME: LOCATION: Steamer shall be a Groen Model SSB-3E/EF SmartSteam100™ stainless steel, boilerless, convection steamer with a self-contained atmospheric 9 KW electric steam generating reservoir. CONSTRUCTION: Steamer cavity and cabinet shall be all stainless steel construction, with removable right and left-side panels, providing access to internal components. Steamer shall have no side vents for increased water/spray resistance. Steamer door shall be all stainless steel with a strong continuous hinge and field-reversible for left or right swing. Door shall be insulated and provided with a one-piece, replaceable seal. Easy-open door handle and latch shall provide positive lock and seal when door is pushed or slammed shut. A hidden magnetic door switch shall cut power to blower fan and shut down power to the steam generating reservoir when the door is opened. Pan support racks shall be stainless steel and removable for easy cleaning. A stainless steel condensate collection tray shall be positioned under the cavity door. Finish: Cabinet exterior, including door, shall be a #3 uniform finish. Cavity interior shall be polished stainless steel. Control panel face plate shall be smudge-resistant polyester film, ensuring maximum ease in cleaning and maintenance of an attractive appearance. UL Listing: Steamer shall be UL and cUL listed. Sanitation: Steamer shall be designed and manufactured to meet NSF requirements and all known health codes. Steamer shall be NSF listed. Controls: Steamer controls shall include an on-off rocker switch; electronic timer, with continuous steam, timed steam and stop buttons; READY light which indicates when cavity is warm and ready for steaming. Performance Features: Steamer cavity shall have a powerful, side-mounted blower to increase steam velocity and provide efficient steam distribution throughout the cavity and between loaded pans. Steam generator shall deliver 3 KW of electric power input per 2-1/2” deep steam pan. Steamer shall have a steam lid positioned over the steam generating reservoir to ensure that adding/removing food does not lower the cavity or water temperature. Heat up time to READY shall typically be 15 minutes or less. Cavity is kept warm and ready for instant steam between loads. No cavity warm up required after READY light comes on. SHORT FORM: 3-Pan Boilerless Convection Steamer, table top or stand-mounted, stainless steel, selfcontained, electric heated. (Model SSB-3EF shown) Atmospheric Steam Generating Reservoir: Steamer shall have an electric- heated steam generating reservoir to provide atmospheric steam to the cavity at a temperature of approximately 212° F. The high-efficiency steam generating reservoir shall have water level sensors. Electric heating elements shall not be immersed in water (dry) and replaceable from the rear. Acidic products and other commercial chemicals shall not be used to clean the steamer. A daily wipe down of the steamer cavity, steam lid and floats is sufficient to maintain optimal operation of the steamer. However, Groen Descaler or approved equal may be required. PAN CAPACITY: Pan Size/ Type Installation: Steamer shall require 208, 240 or 480 Volt, 3-phase electrical service. Single phase shall be available for 208 and 240 Volt operation. Steamer shall be connected to a ¾” NH cold water supply line and a 1-1/2” free venting drain. OPTIONS/ACCESSORIES: Factory Stacking Kit Stainless Steel Support Stand Pan Rack Kit (for support stand) Flanged Foot Kit (for support stand) Caster Kit (for support stand) Heat Shield Kits 4” Adjustable Legs (table top only) Water Supply Requirements: Steamer must be connected to an on-site water supply. Water supply at 30 to 60 PSIG with flow at .75 - 1.5 GPM per cavity. ORIGIN OF MANUFACTURE: Designed and manufactured in the United States.

3-Pan Boilerless Convection Steamer, table top or standmounted, stainless steel, self-contained, electric heated. SERVICE CONNECTIONS & NOTES: DRAIN CONNECTION: 1 1/2" [38] HOSE TYPE (DRAIN FREE VENTING). MINIMUM REAR AND SIDE CLEARANCES: DO NOT CONNECT DIRECTLY TO DRAIN. ALLOW 2" AIR GAP EACH SIDE = 2" [50.8] REAR = 6" [152.4] WATER SUPPLY: 3/4" MALE HOSE CONNECTION. 30 TO 60 PSIG WITH A FLOW RATE OF 0.75-1.50 GPM. PRESSURE REGULATION IS REQ`D FOR WATER PRESSURE OVER 60 PSI. DO NOT USE TREATED WATER. IF THE FLOOR DRAIN ONLY SERVICES THIS STEAMER, THEN THE DRAIN MAY BE LOCATED WITHIN THE...