SmartSteam100 - Model (2)SSB-3EF
2Pages

PROJECT NAME: LOCATION: Steamer shall be a Groen Model (2)SSB-3E/EF double-stacked SmartSteam100™ stainless steel, boilerless, convection steamer. Each steamer cavity shall have a selfcontained atmospheric 9 KW electric steam generating reservoir. CONSTRUCTION: Steamer cavity and cabinet shall be all stainless steel construction, with removable right and left-side panels, providing access to internal components. Steamer shall have no side vents for increased water/spray resistance. Steamer doors shall be all stainless steel with a strong continuous hinge and field-reversible for left or right swing. Doors shall be insulated and provided with a one-piece, replaceable seal. Easy-open door handles and latches shall provide positive lock and seal when doors are pushed or slammed shut. A hidden magnetic door switch shall cut power to blower fan and shut down power to the steam generating reservoir when the door is opened. Pan support racks shall be stainless steel and removable for easy cleaning. A stainless steel condensate collection tray shall be positioned under each cavity door. Finish: Cabinet exterior, including door, shall be a #3 uniform finish. Cavity interior shall be polished stainless steel. Control panel face plate shall be smudge-resistant polyester film, ensuring maximum ease in cleaning and maintenance of an attractive appearance. UL Listing: Steamer shall be UL and cUL listed. Sanitation: Steamer shall be designed and manufactured to meet NSF requirements and all known health codes. Steamer shall be NSF listed. lower the cavity or water temperature. Heat up time to READY shall typically be 15 minutes or less. Cavity is kept warm and ready for instant steam between loads. No cavity warm up required after READY light comes on. Atmospheric Steam Generating Reservoir: Each steamer shall have an SHORT FORM: 6-Pan Boilerless Convection Steamer (3 pans per cavity), double-stacked, stand-mounted, stainless steel, self-contained, electric heated. (Model (2)SSB-3EF shown) electric-heated steam generating reservoir to provide atmospheric steam to the cavity at a temperature of approximately 212°F. The high-efficiency steam generating reservoirs shall have water level sensors. Electric heating elements shall not be immersed in water (dry) and replaceable from the rear. Acidic products and other commercial chemicals shall not be used to clean the steamer. A daily wipe down of the steamer cavity, steam lid and floats is sufficient to maintain optimal operation of the steamer. However, Groen Descaler or approved equal may be required. OPTIONS/ACCESSORIES: Flanged Foot Kit (for support stand) Caster Kit (for support stand) Heat Shield Kits Installation: Steamer shall require two Controls: Steamer controls shall include an 208, 240 or 480 Volt, 3-phase electrical service connections. Single phase shall be available for 208 and 240 Volt operation. Steamer shall be connected to a ¾” NH cold water supply line and a 2-1/2” free venting drain. Performance Features: Each steamer cavity shall have a powerful, side-mounted blower to increase steam velocity and provide efficient steam distribution throughout the cavity and between loaded pans. Steam generators shall deliver 3 KW of electric power input per 2-1/2” deep steam pan. Steamer shall have a steam lid positioned over each steam generating reservoir to ensure that adding/removing food does not Water Supply Requirements: on-off rocker switch; electronic timer, with continuous steam, timed steam and stop buttons; READY light which indicates when cavity is warm and ready for steaming. Steamer must be connected to an on-site water supply. Water supply at 30 to 60 PSIG with flow at .75 - 1.5 GPM per cavity. ORIGIN OF MANUFACTURE: Designed and manufactured in the United States.

6-Pan Boilerless Convection Steamer (3 pans per cavity), double- stacked, stand-mounted, stainless steel, self-contained, electric heated. SERVICE CONNECTIONS ft NOTES: (T) DRAIN CONNECTION: 2-1/2" [64] TUBE (DRAIN FREE VENTING). DO NOT CONNECT DIRECTLY TO DRAIN. ALLOW A 2" AIR GAP (|) WATER SUPPLY: 3/4" MALE HOSE CONNECTION. 30 TO 60 PSIG WITH A FLOW RATE OF 1.50-3.00 GPM. PRESSURE REGULATION IS REQ'D FOR WATER PRESSURE OVER (f) ELECTRICAL CONNECTION: SEE CHART CONDUIT HOLE SIZE: 1 1/4" HOLE MINIMUM REAR AND SIDE CLEARANCES: ®IF THE FLOOR DRAIN ONLY SERVICES THIS STEAMER, THEN THE DRAIN...