Floor Kettles model DHS
2Pages

Stainless Steel 2/3 Steam Jacketed Kettle Low Height Floor Mounted Tilting Self-Contained Gas Heated 40-Gallon Capacity Floor Kettles model DHS Description Kettle shall be a Groen Model DHS (40 gallon) stainless steel steam jacketed unit, operating with a self-contained gas heated steam source contained within the unit. Short Form Groen Model DHS (40 gallon), self-contained, gas heated (specify natural or propane) tilting, steam jacketed kettle. All stainless steel construction with reinforced bar rim, butterfly shaped pouring lip and smooth action mechanical tilt. Patented fin tube burner assembly is 77-80% combustion efficiency, with electronic ignition standard. NSF listed, ASME code constructed for 50 PSI and CSA. design certified (Natural & Propane gas only). Requires 1/2” NPT gas line and 115 volt electric service. Made in USA. Construction Kettle interior shall be of 316 stainless steel with solid one-piece welded construction. The console and all exposed surfaces shall be stainless steel. All controls shall be mounted on the front panel except the thermostat, which is mounted on the trunnion support arm. The kettle body shall be mounted to a heavy-duty stainless steel tilt trunnion. The trunnion assembly is supported by the stainless steel enclosed base. The base shall be provided with stainless steel tubular legs with adjustable bullet feet. The enclosed support base shall contain a smooth operating, self locking tilt mechanism, and shall be of sanitary, drip-proof construction, with interior readily accessible for installation or maintenance. The unit shall be furnished with a heavy reinforced bar rim with a welded-in butterfly shaped pouring lip for maximum sanitation and durability. Faucet mounting bracket is standard. Finish Kettle interior shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance. ASME Code, CSA (Formerly AGA) Design Certified, CRN Registered Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 50 PSI. Unit shall be design certified by the Canadian Standard Association. (Natural and Propane only.) Unit shall be registered in Canada with a CRN number. Sanitation Unit shall be designed and constructed to meet NSF requirements and be NSF listed. Drawoff A 2” sanitary tangent drawoff is optional. (Add “T” to model designation DHS/T). If drawoff is specified, outlet shall be equipped with removable 1/4” perforated stainless steel strainer. Self-contained Steam Source Kettle shall have a gas-heated (natural or propane) selfcontained steam source to provide kettle temperatures of 150 to approximately 295˚F. Unit shall be factory charged with water and rust inhibitor to ensure long life and minimum maintenance. Controls Controls shall include a regulating thermostat, pressure gauge, safety tilt cut-off, safety valve, pressure limit control, water sight glass, low water cut off, a gas regulator valve and electronic ignition module. Power ON switch, Power ON indicator light, LOW WATER indicator light, and 1055 Mendell Davis Drive, Jackson, MS 39272 888-994-7636, unifiedbrands.net Please reference our website for the most updated product information and specifications. heat indicator light are mounted on the kettle support side console. Gas supply shall shut off automatically when unit is tilted. Performance Features Patented fin tube burner assembly delivers 77-80% combustion efficiency; 40 Gallon Model has 150,000 BTU/HR firing rate with 115,500 BTU/HR into the product Electronic ignition to standing pilot is standard on all models. Unit shall be thermostatically controlled to automatically shut off when desired temperature is reached and turn on when product temperature drops below desired setting. Installation Specify natural or propane. Unit requires 1/2” NPT gas line connection and 115 volt electrical connection. No remote steam source required. Options/Accessories Water fill faucets 2” tangent draw-off (TDO) valve with 1/4” perforated strainer Kettle brush kit Lift off cover Counterbalanced hinged cover 1/4” perforated strainer 1/8” perforated strainer Solid disk strainer Contour measuring strip Gallon etch marks Lip strainers Pan carrier (40 and 60-gallon) Origin of Manufacture Kettle shall be designed and manufactured in the United States. Applications Meat Dishes Vegetables Soups Sauces Pasta Rice Pie Fillings Gravies Poultry Seafood Groen Floor Kettles, Page 2 160187D

6" MIN. (152) LEFT SIDE CLEARANCE 1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net © 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation. FRONT VIEW ELECTRICAL CONNECTION 1/2" WATERTIGHT CONDUIT CONNECTOR PROVIDED (BACK SIDE) (SEE NOTE 4) ADJUSTABLE FEET 1. SET THERMOSTAT TO "OFF". 2. SET POWER SWITCH TO "OFF". 1. SET POWER SWITCH TO "OFF". 2. SET THERMOSTAT TO "OFF". 3. OPEN GAS SUPPLY VALVE. 4. SET POWER SWITCH TO "ON", 5. ROTATE THERMOSTAT UNTIL HEAT LIGHT IS ON. 1-2 LOW HEAT (SIMMER), 8-9 HIGH HEAT (BOIL)...