Catalog excerpts
PROJECT NAME: LOCATION: HYPERSTEAM PRESSURELESS STEAMER ELECTRIC MODEL HY-3E/EF Steamer shall be a Groen Model HY-3E stainless steel pressureless steamer with a self-contained atmospheric 8KW electric steam generator. CONSTRUCTION: Steamer cavity and cabinet shall be all stainless steel construction, with removable right and left-side panels providing access to internal components. Steamer door is all stainless steel with a strong continuous hinge and is field-reversible for left or right swing, door shall be air insulated and provided with a one-piece, replaceable seal. Easy-open handle and latch shall provide positive lock and seal when door is pushed or slammed shut. Hidden magnetic door switch cuts power to blower and cuts power to generator when the door is opened. Pan support racks shall be polished stainless steel and removable for easy cleaning. A stainless steel condensate collection tray is positioned under cavity door. FINISH: Cabinet exterior, including door, shall be finished to a #3 uniform finish. Cavity interiors are polished stainless steel. Control panel face plates shall be smudge-resistant polyester film, ensuring maximum ease in cleaning and maintaining an attractive appearance. UL & C.U.L. LISTING: Steamer shall be UL and Canadian UL-listed. SANITATION: Unit shall be designed and distribution throughout cavity and between loaded pans. Steam generator delivers 2.6 KW power input per 2-1/2” deep steam pan. Heat-up time to READY shall be 8-10 minutes or less under normal conditions. Cavity is kept warm and ready for instant steam between loads. No cavity warm up required, after READY light comes on. DELIME indicator light warns operator of need to delime steam generator. Unit will shut off if water level is low. When power switch is turned off, unit automatically blows down the steam generator, to reduce sediment build-up. ATMOSPHERIC STEAM GENERATOR: Unit shall have an electric-heated, rear-mounted steam generator, to provide atmospheric steam to the chamber at a temperature of approximately 212°F. Steam generator has an electric water sensor. 8KW electric heating element is replaceable from the side. manufactured to meet NSF requirements and be INSTALLATION: Unit requires 208, 240 or NSF-listed. Unit shall allow operator to delime steam 480 Volt, single or three-phase electric service. Unit generator through access port on top, without tools or requires two 3/4” NH cold water supply lines and service call. Push button auto-delime feature is standard. 1-1/2” free venting drain. CONTROLS: Steamer controls shall include an ON-OFF power button;Z60-minute electro-mechanical timer, with continuous steam setting; and READY light which indicates when cavity is ready for steaming. AutoDelime button initiates deliming cycle. PERFORMANCE FEATURES: Steamer cavity shall have a powerful side-mounted blower, which increases steam velocity and provides efficient steam 3-Pan capacity stainless steal pressureless steamer, table top, selfcontained, electric-heated. (model HY-3E shown) Groen PureSteem™ Water Treatment System Stainless steel support stand Pan racks for support stand 4” adjustable legs Single water connection (cold water) WATER SUPPLY REQUIREMENTS: All steam systems are subject to contamination and failure due to mineral content found in all water supplies. To minimize service problems, a Groen PureSteem™ Water Treatment System is recommended. ORIGIN OF MANUFACTURE: Designed and manufactured in the United States.
Open the catalog to page 1HY-3E/EF SERVICE CONNECTIONS & NOTES: DRAIN CONNECTION: 1 1/2" TUBE (DRAIN FREE VENTING). COLD WATER SUPPLY AT 30 TO 60 PSIG WITH A FLOW RATE OF 0.50-1.00 GPM AND WITH TWO 3/4" NH CONNECTIONS ONE ELECTRICAL CONNECTION: 3/4" CONDUIT FITTING. [SEE ELECTRICAL REQUIREMENT TABLE] ELECTRICAL REQUIREMENTS PHASE MINIMUM SIDE AND REAR CLEARANCE. MOUNTING HOLES IN BASE USE 3/8"-16 BOLTS WHICH MUST NOT EXTEND INTO STEAMER BY MORE THAN 3/8" (10). UNTREATED WATER SUPPLY CONECTION TREATED WATER SUPPLY CONNECTION DETAIL VIEW OF WATER CONNECTIONS Hyper Steam TABLE TOP OR COUNTER (CUSTOMER PROVIDED) REAR OF...
Open the catalog to page 2All GROEN catalogs and technical brochures
-
OM-CC-E_C2-E
28 Pages
-
OPERATOR-MANUAL
28 Pages
-
ELECTRIC-MODEL-SSB-3EEF
2 Pages
-
FLOOR-GAS-MODEL-AH1
2 Pages
-
BPM-15EC/EA/EC2T
2 Pages
-
BPM-30/40GC/GA/GC2T
2 Pages
-
BPP-30/40EC/EA/EC2T
2 Pages
-
Retail Foodservice
8 Pages
-
Product Guide
12 Pages
-
HyPerSteam - Model (2)HY-3E
2 Pages
-
Intek - Model XSG
3 Pages
-
Intek - Model XS
3 Pages
-
Intek - Model XS4
3 Pages
-
Cabinet Base - (2)CTDC3-20SM
2 Pages
-
Cabinet Base - (2)CTDC3-20SE
2 Pages
-
Floor Kettle - Model DEE-4
2 Pages
-
Floor Kettle - Model AHS
2 Pages
-
Floor Kettle - Model AH-1
2 Pages
-
Table-Top Kettle - Model TDB
2 Pages
-
CBE-10G
2 Pages
-
Floor Kettles model DHS
2 Pages
-
Water Treatment
2 Pages
-
Combo Ease Story
2 Pages
-
Combo Ease HCCC
1 Pages
-
Electric HyPerSteam
2 Pages
-
Gas HyPerSteam
2 Pages
-
Smart Steam 100
2 Pages
-
Steamer applications
1 Pages
-
Steamer Brochure
12 Pages
-
Braising pan
2 Pages
-
Braising pan Brochure
4 Pages
-
Table Top kettles
1 Pages
-
Core products
2 Pages
Archived catalogs
-
KETTLE BROCHURE
8 Pages
-
COMBO EASE
8 Pages
-
CORE PRODUCTS
8 Pages
-
Vortex100
8 Pages
-
SmartSteam100 Boilerless Steamer
8 Pages
-
ECLIPSE BRAISING PANS
4 Pages