PROJECT NAME: LOCATION: DIRECT STEAM KETTLE Kettle shall be a Groen Model DL (Specify 20, 40, 60 or 80-gallon) stainless steel, 2/3 steam jacketed unit operating from direct steam. CONSTRUCTION: Kettle interior shall be of type 316 stainless steel with solid one-piece welded construction. Kettle jacket shall be 304 stainless steel, solid one piece construction. Unit shall be furnished with a heavy reinforced bar rim with a heavy-duty, butterflyshaped pouring lip welded to the top rim of kettle to ensure proper pouring control at all times and to allow the kettle to be used to its full working capacity and for maximum sanitation and durability. Kettle body shall be supported by a stainless steel yoke stand with tubular leg supports. Self-locking worm gear tilt mechanism and rotary steam joint are completely enclosed in stainless steel housing, mounted on the right kettle support arm. Large hand crank provides easy operator tilting and precise pouring control. Faucet mounting bracket is standard. FINISH: Kettle interior shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a semi-deluxe buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance. ASME CODE: Unit shall be ASME shop-inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 25 PSI. SANITATION: Unit shall be designed and constructed to be NSF-listed, meeting NSF and all known health department and sanitation codes. COVER: A cover is optional. No. 31 lift-off cover available for 20 to 80-gallon models. No. 51 counterbalanced cover available on 40 to 80-gallon models. STEAM PRESSURE: Kettle shall operate dependably at any steam pressure between 5 and 25 PSI. Higher working pressures available. MOUNTING: Kettle shall be trunnion-mounted to a sturdy stainless steel tubular leg stand with adjustable floor flanges. SHORT FORM: Stainless steel 2/3 Steam Jacketed Kettle, Floor Mounted, Tilting, Direct Steam. 20-80 gallon capacities. (model DL shown) INSTALLATION: Remote steam source required. Steam trap assembly is required and not provided unless ordered as an option. (See below) See dimension H on other side for steam inlet size and number. ORIGIN OF MANUFACTURE: Designed and manufactured in the United States. Basket Inserts (TRI-BC) Water fill faucets (single or double pantry) Lift off cover Counterbalanced hinged cover kit 2” or 3” tangent draw-off valve Cold water cooling Steam trap assemblies Kettle brush kit 1/8” perforated disc strainer 1/4” perforated disk strainer Solid disc strainer Lip strainers Pan carrier (40 and 60-gallon) Contour measuring strip Gallon etch marks Contour measuring strip Gallon etch marks Braising Pans 144357H Revised 04/12

Stainless steel 2/3 Steam Jacketed Kettle, Floor Mounted, Tilting, Direct Steam. 20-80 gallon capacities. FAUCET MOUNTING BRACKET WITH 1-3/8 DIA HOLE IS STANDARD AND FURNISHED STEAM OUTLET 7/16 DIA. (3 HOLES) (TYPICAL FLOOR FLANGE) SELF LOCKING WORM & GEAR TILTING MECHANISM A.S.M.E. APPROVED SAFETY VALVE C G CONDENSATE DRAIN TUBE JACKET DRAIN PETCOCK CAPACITY (GALLONS/LITRES) MAX. POUR PATH APPROXIMATE TYPE SANITARY DRAWOFF VALVE FURNISHED WHEN SPECIFIED AT EXTRA NOTES: 1. APPROX. 5 P.S.I. REQD. TO PUSH CONDENSATION UP DRAIN TUBE. 3. DIMENSIONS R & T REFER TO KETTLES WITH 2" DRAWOFF VALUE. 2....