PROJECT NAME: LOCATION: DIRECT STEAM KETTLE Kettle shall be a Groen Model D (Specify 20, 40 or 60-gallon) stainless steel, 2/3 steam jacketed unit operating from a direct steam. CONSTRUCTION: Kettle interior shall be of type 316 stainless steel with, solid one-piece welded construction. Kettle jacket shall be 304 stainless steel, solid one piece construction. Unit shall be furnished with a heavy reinforced bar rim with a heavy-duty, butterflyshaped pouring lip for maximum sanitation, pouring control, and durability. Kettle body shall be supported by a stainless steel yoke stand with pedestal base. Self-locking work gear tilt mechanism and rotary steam joint are completely enclosed in stainless steel housing, mounted on the right kettle support arm. Large hand crank provides easy operator tilting and precise pouring control. Faucet mounting bracket is standard. MOUNTING: Outer circumference of pedestal base is flanged down vertically to ensure proper sealing and easy mounting to floor or deck. INSTALLATION: Remote steam source required. SHORT FORM: Stainless steel 2/3 Steam Jacketed Kettle, Pedestal Mounted, Tilting, Direct Steam. 40-60 gallon capacities. (model D shown) Steam trap assembly is required and not provided unless ordered as an option. (See below) See dimension T on other side for steam inlet size and number. ORIGIN OF MANUFACTURE: Designed and manufactured in the United States. FINISH: Kettle interior shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a semi-deluxe buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance. ASME CODE: Unit shall be ASME shop-inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 25 PSI. SANITATION: Unit shall be designed and constructed to be NSF-listed, meeting NSF and all known health department and sanitation codes. STEAM PRESSURE: Kettle shall operate dependably at any steam pressure between 5 and 25 PSI. Higher working pressures available. Basket Inserts Water fill faucets (single or double pantry) Lift off cover Counterbalanced hinged cover kit 2” or 3” tangent draw-off valve (20 & 40-gal. only) Cold water cooling Steam trap assemblies Kettle brush kit 1/8” perforated disc strainer 1/4” perforated disk strainer Solid disc strainer Lip strainers Pan carrier (40 and 60-gallon) Steam regulators Contour measuring strip Gallon etch marks Braising Pans 160170D Revised 04/12

Stainless steel 2/3 Steam Jacketed Kettle, Pedestal Mounted, Tilting, Direct Steam. 40-60 gallon capacities. R ASME APPROVED SAFETY VALVE FAUCET MOUNTING BRACKET IS STANDARD & FURNISHED (FAUCET IS OPTIONAL) STEAM OUTLET STEAM INLET SELF LOCKING WORM & GEAR TILTING MECHANISM MIN. SIDE CLEARANCE (BOTH SIDES) SECTION A-A FLOOR MOUNTING LAYOUT C OF KETTLE L POUR PATH TILT RADIUS CONDENSATE DRAIN TUBE JACKET DRAIN PETCOCK FULLY TILTED POSITION NOTES: TABLE OF DIMENSIONS 1. 2" TANGENT DRAWOFF AND VALVE FURNISHED WHEN SPECIFIED AT EXTRA CO 2. FOR KETTLES WITH 2" TANGENT DRAWOFF, ADD 5" (20 GAL.) & (40...