Sensors, operation and accessories
16Pages

Controls from Griesser. Sensors, operation and accessories

Sensors, operation and accessories

Sensors Light intensity Wind speed Rain and snow Global radiation Operation Complete, local and simultaneous operation Alarm signalization (LED, display) Accessories Group control Installation accessories SFB-1M/SFB-5M hand-held transmitters The hand-held transmitters can be used to operate individual or several motor controls with integrated MOFUB remote module at the same time. GRIESSER SENSORS, OPERATION AND ACCESSORIES – AT A GLANCE High-quality senors are used for Griesser solar shading controls to detect current weather conditions. They transmit the values measured for brightness,...

4-way combined wind/brightness sensor WH360 Wind sensor with heating WSHE 4 | Sensors, operation and accessories

Device type WH360 Brightness sensor Housing color Black Operating voltage 2-24 V DC Dimensions 0 100 x 202 mm Measuring range Typically 5-50 kLux Type of installation Sensor mast, sensor console Recording range Horizontal 360°, vertical -20 to +70° Type of protection IP 33, EN 60529 Sensitivity Typically 30-40 pA/kLux Wind sensor Contact voltage Max. 24 V AC / 35 V DC Electric circuit SELV Measuring range Approx. 5-120 km/h Cable Connection cable 0 5.5 mm with 4 x 0.34 mm2, fine- Output signal Approx. 1 Hz per km/h, 2 pulses per revolution strand, 5 m, extendable to max. 100 m Device type...

6 | Sensors, operation and accessories

Device type WS200 Wind sensor Housing color Black Contact voltage Max. 12 V DC Dimensions 0 100 x 124 mm Contact current Max. 21 mA Type of installation Sensor mast, sensor console Measuring range Approx. 5-120 km/h Type of protection IP 33, EN 60529 Output signal Approx. 1 Hz per km/h, 2 pulses per revolution Connections Electric circuit SELV Cable Connection cable 0 4.5 mm with 2 x 0.34 mm2, finely Heating, electronics Housing color White Type of installation Wall, roof, sensor mast Operating voltage 24 V AC/DC Rated input Max. 5.0 W when heating, otherwise 0.5 W Switching delay Dry =>...

Global radiation sensors GSS 8 | Sensors, operation and accessories

Set consisting of: Global radiation sensors SP Lite 2 Measuring transducer PR4131 avec PR 4501 Power supply unit SPE-24DC Global radiation sensors Housing color gray Type of installation Mounting base on sensor pole Cable Connecting cable, 0 5 mm, 2 x 0.25 mm2 and shield (earth symbol), fine-stranded conductors, 5 m, extendable to a maximum of 100 m. Measuring transducer Housing color red/black Type of installation on a top hat rail, 35 mm 19.2 ... 300 V DC Power consumption type, 2W Connection Screw terminals Cable 2 conductors, 0.5-1.5 mm2, single stranded or finely stranded Measurement...

Power supply unit SPE-24DC 10 | Sensors, operation and accessories

Housing color Gray Type of installation In switch cabinet on top hat rail (EN 50022) or equivalent Type of protection IP 20, EN 60529 Operating environment Dry rooms, -10-50°C, level of pollution 2 CE conformity In accordance with EMC directive 2014/30/EU:2014-02 and low voltage directive 2014/35/EU:2014-02 Weight 70 g Mains connection Voltage 100-240 V AC ±10%, 45-65 Hz, Switch-on peak max. 15 A Rated input 48 VA Connection Screw terminals, 2-pin Cable 2 conductors (L, N), 1.5 mm2, single stranded or finely Output connection Electric circuit SELV, PELV by the protective conductor being...

Installation accessories Sensor mast for WSHE, WS200, NSE, HSE, WH360 SEMA25 Sensor console for WSHE, WS200, WH360 SEKO50 Installation block for fastening HSE to sensor mast MOBL25 Installation ring for fastening NSE to sensor mast MORI25 Installation base for fastening GSS to sensor mast MOSO25 12 | Sensors, operation and accessories

Complete, local and simultaneous operation Recall predefined functions Alarm signalization (LED, display) Sensor and sector statuses recallable Time and date setting Switch programs on/off Time programs Locking options (cleaning) Simulation LCD The EKB CH/EU control key is used to operate the FMC-1I and FMT sun protection control centers. The control button enables central operation of the solar shading systems and also allows the automatic programme to be switched on and off. TB2L-2 desk operation enables you to conveniently operate the blinds from your desk. PURPOSE OF EKB CH/EU MASTER...

Griesser Pro Group control for 2 or 4 motors Connects up to 4 motors Motors with 2 limit switches Master or local operation Simultaneous operation ISO housing The group controls, G2PRO and G4PRO, are designed for the connection of two or, respectively, four 230 V motors with two limit switches. The motors are operated via a central group operating element with two contacts. Power is supplied via a separate connection. The robust relays are mutually interlocked. Combinations using the additional group controls, G2PRO and G4PRO, or using automatic controls with a 230-volt output such as...

The TR2PRO group controls are designed for the connection of two 230 V motors with two limit switches. Power supply and operation of the motors is achieved via a central group operating element which must be interlocked mechanically or electrically. TECHNICAL DATA Voltage for motor connection 230 V AC Nominal current for motor connection 4 A Microfuse None Voltage for motor connection 230 V AC Nominal current for motor connection 4 A Microfuse 4 A Voltage for motor connection 230 V AC Nominal current for motor connection 4 A Microfuse None The pushbuttons must be mechanically or...

Sensor system Operation _H_ Device Easy Tec Remoto® 1 KNX Remoto® 5 KNX Remoto® 1 Easy Remoto® 5 Easy TB2L-2 • Griesser Pro TR2PRO/G2PRO: Group control for 2 motors G4PRO: Group control for 4 motors Your partner Subject to change without prior notice MIX Paper from responsible sources FSC* CO1074O Sensors, operation and accessories