Brochure Boombakken GreenMax
28Pages

GREENMAX connecting green and infrastructure

Corten steel Corten steel The standard material thickness of our Corten Steel planters is 2mm, although they can also be produced in 3-4 and 5mm. Corten Steel, also known as weather resistant steel, is a very strong steel alloy. As soon as Corten Steel is exposed to the elements it will naturally weather and develop a protective layer of rust. This natural fixed coating of rust provides protection against further corrosion. Characteristic of Corten Steel is the brown-orange rust colour and its longevity. Our Corten Steel products are delivered in an un-rusted state and the weathering...

* Wheels possible

* Wheels possible

Galvanised steel Material 4 mm Galvanised steel Hot-dip galvanisation is a production process of galvanising. This process involves providing the metal with a layer of zinc by immersing the product in a bath of molten zinc of about 460° Celsius. The usually dull grey material protects the metal from corrosion caused by weather influences 5 year warranty

Aluminum These planters are made of 3mm thick aluminum as standard, although they can also be produced in 4-5mm. Aluminum is light, strong, durable and resistant to corrosion. The top edge of all planters is reversed twice, which gives them a strong and timeless appearance. All Aluminum planters are equipped with 15mm high feet, so the planter is raised slightly off the ground. Once constructed the planters are powder coated with a strong adhesive primer and finished with a coloured coating. Standard colours are RAL 7021 | 7035 | 9010. Almost all other RAL colours are possible (beware of...

newl new| newl

Hardwood These high quality planters are made from tropical hardwood that is legally harvested. This ensures that they are environmentally sustainable and they provide a warm and natural appearance. We only use hardwood with durability class 2. Due to the high durability of the wood no further treatment is required. If the planters are not treated they will gradually age, which has no influence on the quality of the planters. They are constructed using stainless steel fasteners, the inside is wrapped with EPDM and the bottom with anti-root fabric. We offer our Sevilla model in bespoke...

Hardwood CUSTOM MADE POSSIBLE

Fibreglass Our fibreglass planters are manufactured in high-quality reinforced fibreglass, with additional reinforcement in the corners. The standard colour used is black/grey RAL 7021. Also available in RAL colours: 7006 | 7016 | 7035 | 9005 | 9010 (surcharge 10%). The quality of all our fibreglass planters is enhanced by the colouring, which runs through the entire material. The upper edge has been reversed twice, which gives this planter a splendid timeless appearance. We recommend that the planter should be cleaned at least twice a year. Please note that some cleaners may damage or...

* Wheels possible * Wheels possible

Fibreglass Prunus

Fibreglass silhouette Material 3 mm Fibreglass silhouette Fantastic beautiful organic, natural forms that stand out both solitary or as in a group. Planters that are no longer subordinate to the planting but are an important part of the entire composition. The top edge is reversed twice and follows the contours of the planters. Standard produced in black/grey RAL 7021, (high gloss RAL 9010). Other available RAL colours: 7006 | 7016 | 7035 | 9005 | 9010 (10% surcharge). These planters are made of high quality Fibreglass which is coloured throughout the entire material. We advise to clean and...

* High Gloss

Fibreglass silhouette * High gloss

* High gloss

Fibreglass glossy Material 3 mm Fibreglass glossy Our fibreglass planters are manufactured in high-quality reinforced fibreglass, with additional reinforcement in the corners. The standard colour used RAL 9010. Also available in RAL colours: 7021 | 7006 | 7016 | 7035 | 9005 (surcharge 10%). The quality of all our fiberglass planters is enhanced by the colouring, which runs through the entire material. The upper edge has been reversed twice, which gives this planter a splendid timeless appearance. We recommend that the planter is cleaned at least twice a year. Please note that some cleaners...

Fibreglass glossy * Wheels possible

Material Col°ur Concrete Polymer Concrete is a moulded stone composite, which is ideal for use in public spaces. The material is highly compressed, making it extremely strong. The composite is made out of natural minerals mixed with binding agents, which are becoming increasingly recyclable. The planters are not submitted to wear and tear. They are 100% watertight and are therefore extremely frost resistant. The closed structure of the material means that it does not hold dirt and will naturally clean from rainwater. 5 year warranty

EPS/Polyurea Beto EPS/Polyurea Our EPS/Polyurea planters are executed in almost any shape. By hand, contour cutting or milling. The milling machine can mill 5-axis simultaneously including complex 3D shapes (logos and specific design products up to 10x3,6x3 meters). With this technology the possibilities are endless. For example: planters are available formed like a golf ball or a flower pot. It is possible to design a planter including an inscription. CUSTOM MADE EPS The basic material of these planters is EPS. A versatile polymer with many positive properties for civil engineering as well...

EPS/Polyurea CUSTOM MADE POSSIBLE

Recycled polymer Recycled polymer Planters made from recycled polymer are resistant to all types of weather, are maintenance-free and rot-proof, graffiti-resistand and destined against vandalism. Recycled polymer is solid and colored to the core. The planters consist of 100% recycled polymer and are 100% recyclable. Almost all dimensions are possible. CUSTOM MADE

GreenMax Postbus 43 NL-5473 ZG Heeswijk-Dinther The Netherlands info@greenmax.eu / orders@greenmax.eu www.greenmax.eu