PHOTOCATALYTIC PAINT
4Pages

Technical Data Sheet & Application Guide PHOTOCATALYTIC PAINT The perfect product to eliminate pollutants, due to its double action: photo catalytic and absorbs CO2, It can be used for indoor spaces, offices, hotels, day care centers, kindergardens and hospitals. Used for natural, mineral and ecological photo catalytic coatings. Product application suitable for both outdoors and indoors. High cover rate and whiteness, and high mechanical and chemical strength..It is composed of low density graphene nano material, which provides toughness and robustness unlike the natural products from which it comes, as well as natural materials that control chemical pollutants. Absorbs CO2 as part of its curing chemical process. Its photocatalytic properties are provided by a nanoparticle specific pigment of titanium dioxide (TiO2). This pigment decomposes organic and inorganic gases through oxidation processes, obtaining smaller and harmless components. Solids Content % Shelf life and storage Approximately 12 months unopened, in stable environmental conditions between +5 ºC (min) and +32 ºC (max). Protect from freezing and high temperatures. Our containers are made from recycled polypropylene as part of the processing and manufacturing, which require much less energy to produce than the original containers the recycled ones are made of. Components statement Water, titanium nanodioxide, hydroxyethyl cellulose, alkolxylated diamines,alkaline phosphonates, calcium carbonate, talcs, calcium hydroxide, styrene-acrylic dispersion (Butylglycol and APEO free) <= 5%-3% of dry extract in accordance with DIN 18363 standard, essential oils, surfactants, graphene fibers, specific stabilizers and dispersants. Dense matte white liquid in the container, which can thicken over time without losing its properties (always stir before using to ensure uniformity of the product). Water, add 5 to 7% to improve application by brush, roller or spray. Add the same amount of water to all containers being used for the project. Application - tools Paint roller (medium pile), paintbrush and airless or other sprayer equipment. Manufacturer is not responsible for inappropriate application of products, not in accordance with conditions and methods specified herein. Manufacturer’s liability is only limited to replacement of defective products. No legal liability of any kind can be based on this content, as conditions of use are completely out of our control. This information shall not constitute any legal obligation and no obligation from the seller or point of purchase, or any agreements inferred by employees who sale this product. This edition supersedes all earlier editions. Polg. Ind. Poliviso C/Herreros, 8. 41520. El Viso del Alcor. Sevilla. SPAIN. A-91854877. Telf/Fax: +34 955 292068 ISO-UNE-9001:2008 ISO-UNE-14001:2004 ISO UNE-EN 50001-2011 OHSAS-UNE 18001:2007 NºReg: 41/40783 US OFFICE : 15851 Dallas Parkway, Suite 600. Addison TX 75001. Phone : +1 214 561 8633 / +1 4

Technical Data Sheet & Application Guide PHOTOCATALYTIC PAINT Time between paint coats 8 -10 hours (20 ºC at 65% relative humidity). Let dry for 24 h (20 ºC at 55-65% relative humidity) to be fully dry. Cure progressively (physically-chemically) for 30 days for good hardness and resistance. Available colors include 12 references obtained from the 12 natural concentrated supermineral pigments added to the paint. Recommended to blend with white to obtain gradated colors. To obtain uniform characteristics, remove thoroughly by hand or with electric whisk. Custom made colors starting from 4 L...

Technical Data Sheet & Application Guide PHOTOCATALYTIC PAINT Application procedure Surface type: Aerated concrete. Method of Application: Remove dust if any. Apply mineral sealant or paint diluted at 15% and then 2 or 3 paint coats. Surface type: Concrete. Method of application: Fill in holes and imperfections with Graphenstone Fullmasse if necessary prior to application. Apply mineral sealant or paint diluted at 15% and then 2 or 3 paint coats. Surface type: OSB panels. Method of application: seal surface with an anti stain / water proof product, to shield the stains that could arise due...

Technical Data Sheet & Application Guide PHOTOCATALYTIC PAINT Theoretical yield Depending on the number of paint coats applied, surface texture or absorption, material consumption may vary from the following guideline: Number of paint coats 2 GRAPHENSTONE PHOTOCATALYTIC PAINT not only takes advantage of UV radiations with wave length under 400 nm, but is also active with visible light between 400 nm and 800 nm, which is 52% of total radiation, while UV radiation is just 6%. Certificates * DIN 18363. Restriction of the use of organic materials according to the German Standard. (Meets the DIN...