LIME SUPERFINE MORTAR
4Pages

Technical Data Sheet & Application Guide nanotechnology coatings \S Lime Based Super Fine Mortar For Repair, Traditional Plaster, Selected Aggregate and Graphene §; To be used for masonry works like plaster repairs and/or whitewash of new surfaces, Graphical representation ofthe original packaging. Actual container may my in color, design and packaging Lime based Mortar for repair, Traditional Plaster, selected aggregate and graphene. Apparent density Water Absorption Thermal Conductivity Fire Reaction Upward Flow Downward Flow Shelf life and storage Approximately 12 months unopened, in stable environmental conditions between +5 °C (min) and +32 °C (max). Protect from freezing and high temperatures. Our containers are made from recycled polypropylene as part of the processing and manufacturing, which require much less energy to produce than the original containers Recommendations - Do not apply in extreme temperatures: < 5° C and > 32° C. - Do not apply over plaster, paint or impermeable surfaces. - Do not apply in strong winds, rain and/or icy conditions. - In case of different types of surfaces, mesh or regulating paint coats should be used. - Do not add other products that modify the original formula. - For large thicknesses apply 2 paint coats. -Avoid breathing dust and contact with skin and eyes (see safety sheet). Manufacturer is notresponsible for inappropriate application ofproducts, not in accordance with conditions and methods specified' herein. Manufacturer^ liability is only limitedto replacement of defective products. Ho legal liability of any kind can be based on this c conditions of use are completely out of our control. This information shall not constitute any legal obligation and no obligation from the seller or point ofpurchase, or any agreements inferred by employees who sale this product. This edition supersedes all earlier editions. www nranhpiKtfnnp u«; Polg-lnd PolMso C/Herreros, 8. 41520. El Viso delAlcor. Sevilla. SPAIN. A-91854877. Telf/Fax: +34 955 292068

Technical Data Sheet & Application Guide LIME SUPERFINE MORTAR Packaging Comes in two containers of 15 kg and 5 kg. The 15 kg container has the select gravel and natural additives. The 5 kg container has the traditional lime paste functionalized with graphene. 1. Surface or parts preparation - Surfaces must be clean and resistant. - Dampen surfaces. - In high temperatures or high winds first dampen the surface and moisten the applied mortar within 24 hours. - In case of different types of surfaces, mesh or regularization paint coats should be used. 2. Mixture - Mix the contents of the 15 kg...

Technical Data Sheet & Application Guide LIME SUPERFINE MORTAR * CE MARKING MORTAR UNE EN 998-1. * DIN 18363. Restriction of the use of organic materials according to the German Standard. (Meets the DIN 18363 Standard requirements, according to analysis, trials and Test Report No. B50028-001, 14.04.2015) Due to its chemical composition based on calcium hydroxide for its curing chemical, it reacts with environmental CO2 to spontaneously produce CaCO3, at the rate of 2.97 kg per each 20 kg of product. Thanks to its graphene fiber-based formula, the mortar not only has high standards of...

Technical Data Sheet & Application Guide LIME SUPERFINE MORTAR Lime Based Super Fine Mortar for Repair, Traditional Plaster, Selected Aggregate and Graphene Graphical representation of the original packaging. Actual container may vary in color, design and packaging. *Removing old paint from any surface can generate exposure to lead dust. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN AND PREGNANT WOMEN. Proper protective equipment, as NIOSH-approved respirator, and proper containers and cleaning procedures are required to control lead...