Technical Data Sheet & Application Guide Ecological Date Revision: 7/16/2015 INTERIOR PAINT A natural and organic mineral coating, suitable for indoor use, high covering rate, whiteness, and with high mechanical and chemical strength. Composed of low density graphene nano material, which provides toughness and robustness unlike the natural products from which it comes, as well as natural materials that control chemical pollutants. Ideal for interior applications to ensure bio habitability, as well as breathability, antistatic behaviour and wholesomeness of the building with excellent aging. Also suitable for rehabilitation or restoration of heritage and sustainable restoration of historic or vernacular buildings. Ecologically incomparable. Thanks to nanotechnology, the paint acts as an insurmountable barriers against atmospheric agents that deteriorate mortars and, at the same time, prevents condensation which can cause unhealthy fungi and molds, damaging the building and health of those living in it. Solids Content % Shelf life and storage Approximately 12 months unopened, in stable environmental conditions between +5 ºC (min) and +32 ºC (max). Protect from freezing and high temperatures. Our containers are made from recycled polypropylene as part of the processing and manufacturing, which require much less energy to produce than the original containers the recycled ones are made of. Components statement Water, hydroxyethyl cellulose, alkoxylated diamines, alkaline phosphonates, calcium carbonate, talc, calcium hydroxide, styrene-acrylic dispersion (APEO & butyl glycol free) ≤ 3% - 5% of dry extract in accordance with the DIN 18363 standard, essential oils, surfactants, graphene fiber, stabilizers and specific dispersants. Dense matte white liquid in the container, which can thicken over time without losing its properties (always stir before using to ensure uniformity of the product). Water, add 5 to 7% to improve application by brush, roller or spray. Add the same amount of water to all containers being used for the project. Application - tools Paint roller (medium pile), paintbrush and airless or other sprayer equipment. Manufacturer is not responsible for inappropriate application of products, not in accordance with conditions and methods specified herein. Manufacturer’s liability is only limited to replacement of defective products. No legal liability of any kind can be based on this content, as conditions of use are completely out of our control. This information shall not constitute any legal obligation and no obligation from the seller or point of purchase, or any agreements inferred by employees who sale this product. This edition supersedes all earlier editions. Polg. Ind. Poliviso C/Herreros, 8. 41520. El Viso del Alcor. Sevilla. SPAIN. A-91854877. Telf/Fax: +34 955 292068 ISO-UNE-9001:2008 ISO-UNE-14001:2004 ISO UNE-EN 50001-2011 OHSAS-UNE 18001:2007 NºReg: 41/40783 US OFFICE : 15851 Dallas Parkway, Suite 600. Addison TX 75001. Phone : +1 214 561 8633 / +1

Technical Data Sheet & Application Guide Ecological Date Revision: 7/16/2015 INTERIOR PAINT Time between paint coats 8 -10 hours (20 ºC at 65% relative humidity). Let dry for 24 h (20 ºC at 55-65% relative humidity) to be fully dry. Cure progressively (physically-chemically) for 30 days for good hardness and resistance. Available colors include 12 references obtained from the 12 natural concentrated supermineral pigments added to the paint. Recommended to blend with white to obtain gradated colors. To obtain uniform characteristics, remove thoroughly by hand or with electric whisk. Custom made...

Technical Data Sheet & Application Guide Ecological Date Revision: 7/16/2015 INTERIOR PAINT Application procedure Surface type: Aerated concrete. Method of Application: Remove dust if any. Apply mineral sealant or paint diluted at 15% and then 2 or 3 paint coats. Surface type: Concrete. Method of application: Fill in holes and imperfections with Graphenstone Fullmasse if necessary prior to application. Apply mineral sealant or paint diluted at 15% and then 2 or 3 paint coats. Surface type: OSB panels. Method of application: seal surface with an anti stain / water proof product, to shield the...

Technical Data Sheet & Application Guide Ecological Date Revision: 7/16/2015 INTERIOR PAINT Graphene Thanks to its graphene fiber-based formulation, the paint has high standards of quality, is environmentally flawless and improves the environment we live in. Graphene provides enormous resistance, flexibility and washability for being a mineral product. It extends the product’s useful life, improving texture and appearance once applied. Carbon footprint Calculated as per PAS 2050 Norm, this product absorbs more CO2 than the amount produced through its life cycle. Registrated at Carbonpedia. Application...