Tabling Examples
12Pages

{{requestButtons}}

Catalog excerpts

Tabling Examples - 2

GRANULE COMBI® MORE THAN A POT WASHER. Granule Combi is not just a pot washer – it’s a pot washing system. To benefit from its full potential, there are a few details one should keep in mind when designing the kitchen layout. Over the years, we have tried and tested a number of solutions in close consultation with our suppliers and clients. We would like to share some of our findings with you. We hope that you find the following information of some use as you specify our Granule Combi. Feel free to contact us at any time with any additional comments you may have - your feedback is important...

Open the catalog to page 2
Tabling Examples - 3

CHECK OUT THE FREE ONLINE GRANULDISK DESIGNER’S USER PORTAL. Want online access to tabling production drawings, CAD blocks and many other helpful tips and tricks when planning a professional kitchen with a GRANULDISK wash solution? Check out our free Designer User Portal and register for instant access. 1. Go to www.granuldisk.com/design 2. Register a free user profile. 3. Done!

Open the catalog to page 3
Tabling Examples - 4

ALONG A WALL. The pass through design makes Granule Combi machines suitable for narrow spaces. No swing-space for doors is needed. IN A CORNER. Placing the machine in the corner optimizes space and work flow in small areas. INTEGRATED WITH CROCKERY LOADING STATION. Intergrating a Granule Combi wash solution in a table system that includes a loading station provides a smooth flow in the kitchen. Don't forget... Always install Granule Combi with a rinsing station - although the Granule Technology™ is an efficient No Pre-Washing concept, tableware such as plates, cups and cutlery are too...

Open the catalog to page 4
Tabling Examples - 5

Ideal for the smaller kitchen area. • The foldable Combi table can be installed on either side or at the front of the machine. When not in use, the table folds down and hangs vertically along the side of the machine to create more space around it. (see picture below.) N.B. The Combi Table is suitable for kitchens with a low crockery flow, as it only allows one crockery basket at a time. For larger quantities, larger inlet and outlet tabling will be necessary. • Some of our customers with a machine installed along the wall have chosen to install a Combi table at the front of the machine. The...

Open the catalog to page 5
Tabling Examples - 6

COMBINED TABLE FOR POTS & PANS AND CROCKERY. The combined table fits both standard crockery baskets (500 x 500 mm) and the Granule Combi standard pot wash basket. Please note that the minimum width for the tabling to fit the pot wash basket (GD 102) is 740 mm. To fit standard crockery baskets the minimum width is 510 mm. ■ suitable for installation along wall ■ suitable for a corner installation ■ can be used as entry and exit table. DIMENSIONS. Some prefer a longer exit table than entry table, as a longer exit area creates a better flow, especially with crockery. ■ A 1,600 mm long table is...

Open the catalog to page 6
Tabling Examples - 7

1. TWO-IN-ONE SOLUTION. ■ Kitchens serving up to 300 meals/day will manage both crockery and pot wash with a Granule Combi® (depending on crockery mix). ■ Also kitchens serving up to 300 hot meals/day with up to 1,000 parallel! Meals On Wheels1, will manage both crockery and pots with a Granule Combi® wash solution. Kitchens serving more than 300 meals/day will need a separate washing solution for crockery. However, the Granule Combi still is a very smart choice, as it’s a handy support during peak-hours and can replace the crockery station altogether in periods with less than 300 eating...

Open the catalog to page 7
Tabling Examples - 8

(combined crockery/pot wash table) ■ Make sure the tabling align with and cover the facets of the machine (left). ■ Tabling must not be allowed to overlap or hang over the edge into the wash tank, as it will interfere with the rubber seal meant to keep the hood closed tight during washing (see right). ■ The table should be secured to the machine using screws and predrilled holes. CC: 500 mm The picture shows how the connection of the table to the machine is done by placing both edge to edge and then sealed with silicone.

Open the catalog to page 8
Tabling Examples - 9

ROLLER CONVEYOR OR SLIDE BARS? The table can be fitted with either roller conveyors or slide bars, whichever is preferred.

Open the catalog to page 9
Tabling Examples - 10

TIPS & TRICKS WHEN PLANNING TABLING. MINIMUM WIDTH. The minimum width to fit the Standard Wash Basket is 740 mm To fit standard crockery baskets, minimum width is 510 mm. CONNECTING TABLING TO MACHINE. Please avoid hanging the tabling into the wash tank over the rim, as it will interfere with the rubber sealing and will also disturb the hood motion. For more detailed information on how to dock tabling to the machine, please see page 8. LET THE CROCKERY TRACK BE 20 MM LOWER THAN THE POTWASH TRACK. Place slide bars/rolls for the crockery basket path 20 mm lower than the potwash track to allow...

Open the catalog to page 10
Tabling Examples - 12

GRANULDISK, Jägershillgatan 13, 213 75 Malmö, Sweden info@granuldisk.com | www.granuldisk.com

Open the catalog to page 12

All GRANULDISK catalogs and technical brochures

  1. Granule Maxi

    8 Pages