■ Graepel ladder rungs Graepel ladder rungs are designed with ultimate safety in mind. In different standard designs, they ensure underfoot safety and secure grip - even under extreme working conditions. Depending on the type of perforation, they are offered in different dimensions and shapes (with and without cutout as well as with and without perforated edge). If desired, they are supplied in customer-specific lengths. Fully welded ladders with or without back protection are also available on request. Graepel-22-Round8 Other dimensions on request ^ 30 CM " Perforation diameter: 8 mm Division 15 mm, standard staggered Fixed size 306 mm (with cutout for clearance between ladder bars 300 mm) Tube 0 27 mm Stock length 1,950 mm without cutout Complies with DIN EN ISO 14122 Perforation diameter: 4 mm Division 10 mm, standard staggered Fixed size 308 mm (with cutout for clearance between ladder bars 300 mm) Tube 0 27 mm Stock length 2,000 mm without cutout Perforation diameter: 6 mm Division 20 mm, standard staggered Fixed size 318 mm (with cutout for clearance betwee n ladder bars 300 mm) Tube 0 27 mm Stock length 2,000 mm without cutouts Complies with DIN EN ISO 14122 Order number Ladder rungs and steps

Graepel ladder rungs Graepel ladder rungs Graepel-30-Round 6 with inner edges (formerly Graepel-LO/Grip) Order number Order number Stainless steel Material no. 1.4404 Load diagram Graepel-30-Round 6 with inner edges Load diagram Graepel-22-Round4 Fixed size 318 mm (with cutout for clearance between ladder bars 300 mm) Stock length 2,000 mm without cutout Graepel-30-Round 6 with unperforated edge Stainless steel Material no. 1.4404 0,5 Especially slip-resistant due to the serrated stepping edge Suitable for several tube diameters and support widths Weldable to tubes without cutout (just bend the...

■ Graepel ladder rungs Graepel-40-Lightprofile Slip-resistant stepping edge Extreme drainage Suitable for several tube diameters and support widths Weldable to tubes without cutout Complies with DIN EN ISO 18799-1 Perforation as for Graepel-Metric Inner edge of 12 mm on one side Fixed size 495 mm (with cutout for clearance between ladder bars [1.5" tube] 452 mm) For 500 mm bar central clearance Stock length 1,980 mm without cutout Complies with DIN EN ISO 18799-1 (formerly Graepel-LO/Steg) rL Order number (formerly Graepel-LO/GS) (formerly Graepel-LO/RS) Perforation as for Graepel-Stabil Inner...