WINDOW SILL GRILLE Z-600 Installation dimensions ZA600 (H+26) x (L+26) 12,5 The grille type Z-600 is used for the supply and exhaust of cooled or heated air in facilities such as offices, shops, ... The grille can be mounted in a window sill where strict aesthetic construction is desired. This grille can not be used for floor mounting. Technical information Characteristics : • straight bars or 15° deflection • frame = 19 mm • bars on 12,5 mm or 162/3 mm to centre • available in multiples of 1 mm in length and 12,5 mm in height min L = 100 mm, max L = 2000 mm min H = 50 mm, max H = 300 mm • linear grilles (= grille consisting of intermediate and end pieces) • ZA600: removable core • ZB600: fixed core L: nominal length (mm) H: nominal height (mm) All dimensions in mm Fast selection diagram Construction: • extruded aluminium frame and bars • finish satin anodised Throw factor is based on a vR of 0,17 m/s in the occupied zone. For a detailed selection and other dimensions, see p. 1 230. Valid only for supply, see diagram p. 1 230 for exhaust. Specifications subject to change © 4-2011

Specifications description ceiling inlay Aluminium grille with fixed horizontal straight bars for window sill mounting. Standard natural tone anodised. Type: - : grille in one piece E: end piece M:intermediate piece L: left end piece (for 15° deflection)* R: right end piece (for 15° deflection)* 0: 2: 4: 6: bar grille on 12,5 mm to centre bar grille, deflection 15° and 12,5 mm to centre bar grille on 162/3 to centre bar grille, deflection 15° and bars on 162/3 to centre A: frame 19 mm, removable core B: frame 19 mm, fixed core * NOTE: L (left) and R (right) are being determined by looking at...