FIXED SLOT DIFFUSER TE600 • TE700 Installation dimensions Specifications subject to change © 4-2011 7 SLOTS L 300 B 253 øD 200 T 212 E (1R) 228 E (2R) 233 P 240 L = nominal length All dimensions in mm The slot diffuser, type TE600/700, is used for the supply and exhaust of cooled and heated air in facilities such as offices, meeting rooms, shops, ... The especially developed deflectors ensure a stable horizontal air supply pattern and a low noise level. The result is a high induction level and an air flow penetration in the space without internal turbulences. By the reduced pressure drop, the diffuser is the ideal solution for VAV-applications. Technical information Characteristics • choice of the supply direction of the fixed not adjustable deflectors in 1 or 2 directions (supply directions provided right air entry) • diffuser supplied with plenum, optional internal insulation, with or without damper; the plenum is fixed directly on the diffuser (mounting by Grada upon re-quest) • TE600: fixed core, available with 1-8 slots, standard lengths 300, 600, 900, 1200 mm TE700: hinged core, with push-pull closing (available from 4 slots) Construction • aluminium diffuser, painted white (RAL 9010) • galvanised steel sheet plenum • plenum provided with mountiing eyes (ø 7 mm), mounting straps available up

GRRDR INTERNATIONAL 1R = 1 supply direction P = minimum ceiling opening width 2R = 2 supply directions nominal dimension = length of the filter L + 13 = minimum ceiling opening length Specifications subject to change © 4-2011

Specifications description Example: Aluminium slot diffuser with 2 fixed supply slots in the same direction. Delivered complete with plenum box both with circular side entry spigot and damper. The diffuser is painted white (RAL 9010). The plenum is made out of galvanised steel sheet. Type: TE602 + TP202 G TE600 with 1 slot, supply direction at the right, air entry at the right, L = 900 mm. 1: number of slots, supply direction AT THE RIGHT, with air entry at the right 0: number of slots, supply direction AT THE LEFT, with air entry at the right 6: fixed core 7: hinged core, push-pull closing Note: -...

GRRDR INTERNATIONAL How to order TP100, not insulated and without damper for TE601, L = 900 mm. spigot diameter Slot length (mm) - : non insulated plenum G: internally insulated plenum H: double sided insulated plenum 1: number of slots, supply direction AT THE RIGHT, with air entry at the right 0: number of slots, supply direction AT THE LEFT, with air entry at the right 1: without damper in inlet spigot (for TE600) 2: with damper in inlet spigot (for TE600) 3: without damper in inlet spigot, provided with mounting straps (for TE600) 4: with damper in inlet spigot, provided with mounting straps...