SLS_2024
11Pages

Catalog excerpts

SLS ALUMINIUM ADJUSTABLE SLOT DIFFUSER WITH FLANGE TECHNICAL INFORMATION APPLICATION CONSTRUCTION VARIANTS SLS, SLS_P The adjustable slot diffuser type SLS is suitable for the supply and exhaust of cooled and heated air. Each slot (available from 1 to 6 slots) is individually adjustable and is equipped with 2 specially designed discrete deflectors. This results in an ideal air flow pattern that can be adjusted by 180° (vertical and horizontal air flow). Available in several lengths, in multiple middle and end sections to create a linear diffuser up to any length or in panel version for installation in modular system ceilings. Sleek design with discrete aluminium deflectors (Slot width 25mm) Easy mounting with mounting brackets (in combination with plenum type SPS) Wide temperature range for both heating and cooling Airflow direction Lateral, axial, adjustable Airflow type Linear, exhaust or supply Available steps in length Flange size Slot width Installation depth Panel width (SLS_P) Standard material Extruded aluminium Standard finishing Product finishing options powder coated extruded aluminium Deflector fixation piece Powder coated steel sheet metal With mounting bracket on SPS plenum box, fixed mounding on SPB plenum box Mounting options SLS on panel Fixed mounting on SPP plenum box Galvanised (275g/m²) steel sheet, PP/TPE spigot Optional insulation Class D spigot with double lip seal Volume control Mounting options Optional perforated volume flow control disk inside the spigot Mounting eyes (Ø7mm) standard, mounting brackets available upon request QUICK SELECTION Supply Qv [m³/h] SPS0 EFFECTIVE AIR DISCHARGE AREA Supply Ak [m²/m] BOBSL

Open the catalog to page 1

SLS PRODUCT KEY SLOT DIFFUSER WITH FLANGE SLS S Slot length L (mm): From 300 to 2000mm, per 1mm Panel size L2 (mm): From 350 to 2055, per 1mm -: Naturel anodised (not for P, Z and C) F: Coated -: Standard C: Corner section 90° (600x600mm) E: End piece M: Intermediate piece P: Panel with 4 raised edges of 10 mm Z: Panel with 2 sides fine line 5/8 on the short side and 2 raised edges of 10 mm on the long side Q: Square panel with 4 raised edges of 10 mm Y: Square panel with 4 sides fine line 5/8 1: 1 slot (1 to 6 slots) 0: Without deflectors, black spacers 1: Black deflectors RAL9005 MATT,...

Open the catalog to page 2

PRODUCT KEY PLENUM SPB FOR DIRECT MOUNTING ON SLOT DIFFUSER SLS (EXCEPT PANEL VERSION) S Slot length L (mm): From 300 to 2000mm, per 1mm 0: Without mounting straps 1: With mounting straps -: Without damper D: With damper -: Non insulated plenum G: Insulated plenum H: Half insulated plenum S: Side connection -: Standard L: End piece left (looking at plenum front into the inlet of the connection collar) M: Intermediate piece R: End piece right (looking at plenum front into the inlet of the connection collar) 1: 1 slot (1 to 6 slots) PLENUM SPP FOR DIRECT MOUNTING ON SLOT DIFFUSER SLS_P (PANEL...

Open the catalog to page 3

PRODUCT KEY SLOT DIFFUSER SLS WITH PLENUM SPB (MOUNTED) S Slot length L (mm): From 300 to 2000mm, per 1mm 0: Without mounting straps 1: With mounting straps -: Without damper D: With damper -: Non insulated plenum G: Insulated plenum H: Half insulated plenum S: Side connection -: Naturel anodised F: Coated -: Standard L: End piece left (looking at plenum front into the inlet of the connection collar) M: Intermediate piece R: End piece right (looking at plenum front into the inlet of the connection collar) 1: 1 slot (1 to 6 slots) 0: Without deflectors, black spacers 1: Black deflectors...

Open the catalog to page 4

SLS PRODUCT KEY DUMMY PLATE BOBSL FOR SLOT DIFFUSER SLS (MOUNTING IN COMBINATION WITH MOUNTING BRACKETS SL) B Length dummy plate (mm): From 20 to 2000mm, per 1mm 1: 1 slot (1 to 6 slots) MOUNTING BRACKET SL FOR CEILING MOUNTING SLOT DIFFUSER SLS (WITHOUT PLENUM) S 2 1: 1 slot (1 to 6 slots) Slot length <=1200: 2 brackets Slot length >=1201: 3 brackets MOUNTING BRACKET SPS FOR MOUNTING SLOT DIFFUSER SLS IN DIY-PLENUM S

Open the catalog to page 5