GRILLE FOR CIRCULAR DUCTS AS/GS 100/110/120/130 • steel / alumium / galvanized Installation dimensions AS/GS120 Application The grille type AS/GS is used for the supply and exhaust of cooled or heated air in facilities such as warehouses, workshops, commercial centres, ... The grille can be direct mounted on a circular duct. The vanes can be adjusted manually and individually to obtain an optimal air distribution. Technical information Nominal dimensions: L = nominal length (mm) H = nominal height (mm) All dimensions in mm Characteristics: • free passage ca. 70 % (depending on the position of the vanes) • AS/GS 120: exhaust grille • AS/GS 130: supply grille • nom. L = 225, 325, 425, 525, 625, 825, 1025, 1225 mm nom. H = 75, 125, 225, 325 mm Fast selection diagram • GS...G: galvanized • AS: roll-formed aluminium sheet* • GS: roll-formed steel sheet* * Both phosphated and painted white (RAL 9010) Throw factor is based on a vR of 0,17 m/s in the occupied zone. See p. 1 160 for a detailed selection. Only for supply. For exhaust, see p. 1 160 Specifications subject to change © 9-20

Specifications description Example: Steel supply and exhaust grille with individually adjustable vanes for circular duct mounting, equipped with an inclined damper. The grille is painted white (RAL 9010) Type: GS130 + GT005 GT005: steel sheet inclined hit-and-miss damper, painted black GT006: steel sheet hit-and-miss damper, painted black GT007: damper with vertical opposed blades. Galvanised steel sheet painted black Visible screw fixing Fixing dimensions G: galvanized grille 0: without a damper 5: inclined hit-and-miss damper GT005 6: hit-and-miss damper GT006 7:damper GT007 8:damper GT008 0:...

CRRDR INTERNATIONAL Specifications subject to change © 9-2010

Notities / Notes / Notes