Catalogs >
GRADA International >
A100-G100_PI

A100-G100_PI
4Pages

Catalog excerpts

GRILLE WITH ADJUSTABLE VANES A-100 • G-100 Installation dimensions A-100/G-100 Application The grilles type A-100/G-100 are used for the supply and exhaust of cooled and heated air in facilities such as offices, shopping centres, workshops ,... The grille can be used for wall or exposed duct mounting. It is also possible to mount the grille in the ceiling in order to create e.g. an air curtain (only with AE/GE and AF/GF). The horizontal vanes can be adjusted manually and individually to obtain an optimal air distribution. Technical information L = nominal length (mm) H = nominal height (mm) All dimensions in mm Fast selection diagram Dimension L x H (mm) • single row of vanes • free passage ca. 70 % (depending on the position of the vanes) • Available in multiples of 25 mm, in length as well as in height G-100: min L = 75 mm, max L = 2000 mm min H = 75 mm, max H = 1200 mm A-100: min L = 100 mm, max L = 2000 mm min L = 75 mm, max H = 2000 mm • linear grilles (= grilles consisting of intermediate and end pieces), available in heights from 75 mm till 525 mm and in steps of 25 mm. Length from 100 mm till 1000 mm and in steps of 50 mm. • also available with 35 mm frame width (only in aluminium construction) Construction: Valid for supply only. See diagram p. 1 050 for exhaust. Throw factor is based on a vR of 0,17 m/s in the occupied zone. See p. 1 050 for a detailed selection and other dimensions. Specifications subject to change © 7-2011 • A-100: frame in extruded aluminium; aluminium roll-formed strip; vanes both satin anodised • G-100: roll-formed steel sheet and painted white (RAL

Open the catalog to page 1

Specifications description • GT003: perforated steel sheet, 35 % passage, painted black (RAL 9005) Steel supply grille with horizontal, individually adjustable vanes for wall or exposed duct mounting, equipped with a damper. The grille is painted white (RAL 9010). Type: • GT007: damper with vertical, opposed blades. Constructed in galvanised steel sheet, painted black. (For further details, see p. 1 290) • GR001: mounting frame in roll-formed, galvanised steel sheet (only for AD/GD and AE/GE) How to order GE100, dimension 600 x 200 mm, with damper GT007 and mounting frame GR001 a) Grille -...

Open the catalog to page 2

Grille with visible screw fixing Grille with concealed screw fixing and mounting frame Grille with friction springs and mounting frame Delivery possibilities Grille with single row of horizontal vanes Aluminium Specifications subject to change © 7-2011 Construction friction springs (not available for linear grilles) concealed screw fixing visible screw fixing with perforated sheet GT003 35 % passage with damper GT007

Open the catalog to page 3