GPS ANTENNA CONVERTER UNIT
9Pages

GORGY Q TIMING LA MARQUE DU TEMPS GPS ANTENNA CONVERTER UNIT The GPS antenna combines a planar antenna and a frequency converter, which translates the high-frequency phase-modulated spread spectrum signal of the GPS system to an intermediate frequency. This way a standard cable (e.g. AWG22) can be used for the connection with the GPS clock and a distance of up to 120 meters between receiver and antenna is possible without additional amplifier. Key Features Performance Specifications (GPS system) • 12-channel simultaneous operation • Ultra-low power consumption: less than 1W • Dual sensitivity modes with automatic switching • Holder for Wall Mounting (included) Interface Characteristics • Cable: o 1 Pair 22 AWG Shielded Cable, 10 meters • Power consumption: less than 1 W • Passive current loop system • DCF 77 transmission format • Acquisition: less than 4 minutes. General: L1 (1575.42 MHz) frequency, C/A code, 12-channel, continuous tracking receiver Update rate: 1 Hz Accuracy: o Horizontal: <5 meters (50%), <8 meters (90%) o Altitude: <10 meters (50%), <16 meters (90%) o Velocity: 0.06 m/sec o PPS (static): ±50 nanoseconds Acquisition: o Reacquisition: <2 sec. (90%) o Hot Start: <10 sec (50%), <13 sec (90%) o Warm Start: <38 sec (50%), <42 sec (90%) o Cold Start: <50 sec (50%), <84 sec (90%) o Cold start requires no initialization. Operational limits: o Altitude: 18,000 m o Velocity: 515 m/s o Either limit may be exceeded, but not both Environmental Specifications • Operating Temperature: -40° C to +85° C • Storage Temperature: -55° C to +105° C • Vibration: o 0.008 g2/Hz 5 Hz to 20 Hz o 0.05 g2/Hz 20 Hz to 100 Hz o -3 dB/octave 100 Hz to 900 Hz • IP code : 54 NB: the unit is remotely powered by the connected GPS receiver (via the antenna cable) and can be used only with GPS equipment from GORGY TIMING. A standard cable of 10 meters is included. Please specify your order, if you need a different cable length. Ref : BDR_UK1 -8_Master-clock-Time-servers-Software-V8.0-priceless All technical changes, aesthetic, colour can be made without notice.

GORGY Q TIMING LA MARQUE DU TEMPS GNSS elements (Global Navigation Satellite System) PHYSICAL CHARACTERISTIC • Weatherproof housing • Filtering for harsh RF jamming environments • Proven extra rugged, reliable • RoHS-Compliant (Pb-free) Dimensions: 3.05” D x 2.61” H (77.5 mm x 66.2 mm) Weight: 6.0 oz (170 grams) Enclosure: Off-white plastic Connector: F-type & TNC (5 V DC) TNC (3.3 V DC only) Mounting: 1 ”-14” thread or 3/4” pipe thread • Operating Temp: -40 °C to +85 °C • Storage Temp: -40 °C to +100 °C • Vibration: 10-200 Hz Log sweep 3 g (Sweep time 30 minutes) 3 axes • Shock: 50 g...

GORGY Q TIMING LA MARQUE DU TEMPS Hardmount Antenna provides a permanent-mount antenna. Housed in a compact, low-profile package, the Hardmount Antenna is well-suited to mobile positioning applications. The Hardmount Antenna is a miniature patch antenna with a 25 dB preamplifier. The antenna is designed for installation on vehicles with a 0.75 inch mounting hole. The antenna comes complete with gasket and mounting nut. May be installed on flat surfaces up to 0.1 inch thick. Hardmount Antenna Technical Data • Weight: 6.4 oz. (180g) • Dimensions: 2.48 inch dia. x 1.6 inch ht. (63mm dia. x...

GORGY Q TIMING LA MARQUE DU TEMPS The GNSS1-TMG-40N global GNSS timing reference antennas are specifically designed for long-lasting, trouble-free deployments in congested cell-site applications. The low noise, high gain amplifier is well suited to address attenuation issues associated with applications requiring longer cable runs. Their unique radome shape sheds water and ice, while eliminating problems associated with bird perching. PCTEL offers an array of compatible mounting configurations. Custom models or site kits options are also available. This antenna is made of materials that...

GORGY Q TIMING LA MARQUE DU TEMPS The Miniature GPS Antenna is a water-resistant, low-profile antenna. It has a magnetic mounting for quick, convenient placement on or inside vehicles, making it ideal for mobile asset management and embedded board products. • Mounting: Magnetic Mount - waterproof IP67 • Impedance: 50 ohms • Frequency: 1575.42MHz • Input voltage: 3V or 5V (20mA at 3V) • Polarization: RHCP • VSWR: 2.0 max • Cable: RG174 • Connector: SMA • Dimension (L x W x H): 37.4mm x 34mm x 12.95mm • GPS ANTENNA Patch is provided with 5 or 10 meters cable Ref : BDR_UK1...

GORGY Q TIMING LA MARQUE DU TEMPS Both connector ports of this unit are equally protected. This provides protection no matter which way it is installed. Either port can face the antenna and either port can face the equipment. Components • Centre contact • Outer contact • Other metal parts • Crimp ferrule • Insulator • Gasket Materials • Copper alloy • Brass Environmental Specifications • Operating temp.: -40°C / +85°C • Protection class: IP 67 (IEC 60529) • Breakdown voltage: 150...250 V DC (100 V/s) • Impulse discharge current: o 8/20 ps, 5 kA 10 times / 10 mal o 8/20 ps, 10 kA...

GORGY Q TIMING LA MARQUE DU TEMPS GPS Inline Amplifier These inline amplifiers are capable of amplifying both L1 and L2 frequencies and will improve performance on receivers with cable lengths of over 15m (50ft). They’re available with TNC connectors and no special wiring is required, making installation a breeze. The amplifier is compatible with all dual frequency GPS receivers due to its wide operating voltage range, 3VDC to 28VDC, and low power consumption, 8mA. These amplifiers are made with gold plated brass with rugged and watertight packaging. Just plug the amplifier directly in line...