Premium Interior/Exterior Latex High-Gloss
2Pages

{{requestButtons}}

Catalog excerpts

Premium Interior/Exterior Latex High-Gloss - 1

Premium Interior/Exterior Latex High-Gloss GL71XX DESCRIPTION GLIDDEN™ interior/exterior high-gloss paint is perfect for trim, doors, cabinets and furniture because of its long lasting durable finish. Specially formulated with 100% acrylic latex to protect against UV rays, color fading and severe weather conditions. Provides a mildew resistant coating. SPECIFICATION DATA Color: White & custom colors Tint appropriate base with universal colorants Finish: High-Gloss Sheen - 90 units minimum @ 85º Gloss - 65 units minimum @ 60º Clean-up Solvent: Soap & water Density: 10.06 lbs/gal (1.21 kg/L) VOC: 50 g/L (0.42 lbs/gal) maximum Solids: Volume - 35% +/- 1% Weight - 47% +/- 1% FEATURES • • • • • • • Durable gloss finish Weather resistant against blistering, peeling and flaking Fade and chalk resistant Provides a mildew resistant coating Easy application Quick drying and recoat Low odor and VOC COMPOSITION • • • 100% Acrylic Resin Titanium Dioxide and Extender Pigments Not manufactured with lead or mercury containing materials. Practical Coverage: 2 Apply at 300-400 sq ft/gal (7-10 m /L). Actual coverage may vary depending on substrate and application method. Recommended Film Thickness: 4.0 - 5.3 mils wet 1.4 - 1.9 mils dry Flash Point: None Dry Time: 77°F (25°C) & 50% RH To touch - 1 - 2 hours To recoat - 4 hours Shelf Life: 1 year minimum - unopened Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last page. DSF1-0690

Open the catalog to page 1
Premium Interior/Exterior Latex High-Gloss - 2

PREPARING SURFACES FOR A PROFESSIONAL FINISH PREPARING PAINTED SURFACES Spackle holes or cracks. Lightly sand glossy areas. Make sure all areas are clean, sound and free of flaking paint or any substances such as oil, grease, dirt or mildew. Spot prime bare areas with the appropriate primer. Prime woods prone to cracking such as yellow pine or T-1-11 plywood siding with the appropriate primer. cleaning or a light sandblasting. Thoroughly rinse with water and allow to fully dry. Remove loose aggregate and prime with an appropriate masonry primer. For concrete block, fill with a latex block...

Open the catalog to page 2

All GLIDDEN catalogs and technical brochures