Garage Floor Interior/Exterior Latex Paint Satin

$Garage Floor Interior/Exterior Latex Paint Satin$

Garage Floor Interior/Exterior Latex Paint Satin

Product catalog summary

Description: This document outlines the features and application instructions for a high-quality, water-based floor paint designed to protect and enhance concrete surfaces. The paint offers a durable satin finish resistant to oil, gasoline, scuffing, fading, cracking, peeling, and blistering. Proper surface preparation is crucial for optimal performance.

Composition: The paint is composed of acrylic resin, titanium dioxide, and extender pigments. It is free from lead or mercury-containing materials.

Features: The paint is easy to use, durable, and can be cleaned with soap and water. It is available in Beige and Battleship Gray colors with a satin finish.

Specification Data:

Gloss: Minimum 30 units at 85º
Density: 9.5 lbs/gal (1.14 kg/L)
VOC: Maximum 50 g/L (0.42 lbs/gal)
Solids: Volume - 35±2%, Weight - 41±2%
Coverage: 250-400 sq ft/gal (7-9 m2/L)
Film Thickness: 4.0 - 6.4 mils wet, 1.4 - 2.2 mils dry
Dry Time: Touch - 2-4 hours, Recoat - 8 hours, Light foot traffic - 24 hours, Vehicular traffic - 72 hours
Shelf Life: Minimum 1 year unopened

Application Instructions: Stir thoroughly before use and intermix multiple cans for color consistency. Apply when temperatures are between 50-90°F (10-32°C). Use a high-quality brush, roller, or airless sprayer. Two coats are recommended for best results. Surfaces may become slippery when wet; add anti-skid material for pedestrian areas.

Precautions: Ensure surfaces are sound, dry, and clean. Avoid painting over finishes like polyurethane without testing adhesion. Be cautious of lead dust when removing old paint. Use protective gear and ensure proper ventilation during application.

Surface Preparation: For new concrete or masonry, ensure surfaces are cured, dry, and free of contaminants. For previously painted surfaces, clean thoroughly and remove loose paint. Follow specific instructions for mildew removal and surface priming.

Warnings: The product can cause irritation and may be harmful if swallowed. Keep out of reach of children and use with adequate ventilation. Follow first aid instructions in case of contact or ingestion.

Catalog excerpts

$Garage Floor Interior/Exterior Latex Paint Satin-1$

Garage Floor Interior/Exterior Latex Paint Satin 31XXF DESCRIPTION This high quality ready-to-use, water-based floor paint protects and enhances the appearance of your concrete. Its finish is resistant to oil and gasoline to lessen maintenance of hard-to-clean interior or exterior floors. This durable, satin finish paint resists scuffing, fading, cracking, peeling and blistering. Surface preparation is critical to the long-term performance of this product; please thoroughly follow the preparation steps noted below. SPECIFICATION DATA Color: Beige / Battleship Gray Finish: Satin Gloss - 30 units minimum @ 85º Clean-up Solvent: Soap & water Density: 9.5 lbs/gal (1.14 kg/L) VOC: 50 g/L (0.42 lbs/gal) maximum Refer to MSDS for regulatory VOC content of complete product line • East to Use • Durable • Soap and Water Clean-up Solids: Volume - 35+/- 2% Weight - 41+/- 2% Practical Coverage: 2 Apply at 250-400 sq ft/gal (7-9 m /L). Actual coverage may vary depending on substrate and application method. COMPOSITION • Acrylic Resin • Titanium Dioxide and Extender Pigments • Not manufactured with lead or mercury containing materials. Recommended Film Thickness: 4.0 - 6.4 mils wet 1.4 - 2.2 mils dry Flash Point: None Dry Time: 77°F (25°C) & 50% RH To touch - 2 - 4 hours To recoat - 8 hours To light foot traffic - 24 hours To vehicular traffic - 72 hours Shelf Life: 1 year minimum - unopened Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last pag

Open the catalog to page 1

$Garage Floor Interior/Exterior Latex Paint Satin-2$

SURFACE PREPARATION GENERAL SURFACE PREPARATION: Surfaces to be painted must be sound, dry, clean and free of oil, grease, dirt, rust, mildew, form release agents, curing compounds, loose and flaking paint and other foreign substances. NEW SURFACES: CONCRETE (CONCRETE FLOORS) and MASONRY - Do not use on floors subject to hydrostatic pressure. Cure at least 30 days before painting. pH must be 10.0 or lower. Roughen slick poured or precast concrete by acid etching or sandsweeping. Follow acid manufacturer's application and safety instructions. Rinse thoroughly twice with water and allow to dry....

Open the catalog to page 2

All GLIDDEN catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list