COLOR? Interior Latex Flat
2Pages

{{requestButtons}}

Catalog excerpts

COLOR? Interior Latex Flat - 1

COLOR™ Interior Latex Flat CLN20XX DESCRIPTION GLIDDEN™ COLOR™ Interior Latex Flat is our best quality flat latex wall paint, specially formulated for exceptional coverage on walls and ceilings. GLIDDEN COLOR paint is available in thousands of colors in beautiful, spatter-free, easy-to-apply finishes. It is a durable wear-resistant flat finish that quickly dries to a smooth, even finish that hides minor surface imperfections. And our Guaranteed Results provides you the assurance of product durability and long-term performance. SPECIFICATION DATA Color: White. Ready mix & custom colors Finish: Flat, 1-5 units @ 85º Clean-up Solvent: Soap & water Density: 12.22 lbs/gal (1.47 kg/L) VOC: 50 g/L (0.42 lbs/gal) maximum FEATURES • • • • • • • • Guaranteed Results Excellent coverage and application properties Washable and Scrubbable Good burnish resistance Easy Spatter-free application Quick dry and recoat Low-VOC Provides a mildew-resistant coating Solids: Volume - 39% +/- 1% Weight - 57% +/- 1% Practical Coverage: Apply at 300-400 sq ft/gal (7-10 m2/L). Actual coverage may vary depending on substrate and application method. Recommended Film Thickness: 4.0 - 5.3 mils wet 1.5 - 2.0 mils dry Flash Point: None COMPOSITION • Vinyl Acrylic Resin • Titanium Dioxide and Extender Pigments • Not manufactured with lead or mercury containing materials. Dry Time: 77°F (25°C) & 50% RH To touch - 30-60 minutes To recoat - 2-4 hours Shelf Life: 1 year minimum - unopened Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last page. DSF1-0690

Open the catalog to page 1
COLOR? Interior Latex Flat - 2

SURFACE PREPARATION All surfaces must be sound, dry, clean and free of oil, grease, dirt, mildew, form release agents, curing compounds, loose and flaking paint and other foreign substances. NEW SURFACES: Drywall - Prime with PROMASTER MP5111 water-based primer sealer. Wood - Set nails, fill with latex spackle. Sand smooth. Dust clean. Prime with PRIMECOAT PC1000 latex wood primer or PRIMECOAT PC2000 alkyd wood primer. Concrete, Masonry and Plaster - Cure at least 30 days before painting. pH must be 10.0 or lower. Roughen slick poured or precast concrete and remove sealers by chemical...

Open the catalog to page 2

All GLIDDEN catalogs and technical brochures