Extra clear, low-iron glass

Extra clear, low-iron glass Description - shop windows and display windows; - insulated glass units; - external facade; - special applications: SGG DIAMANT is suitable for all applications which require maximum transmission of UV rays: photocopiers, medical equipment. SGG DIAMANT is a unique colourless extra-clear oat glass with a very low iron oxide content. As a result the glass has a very high light transmittance level and is signicantly less green in appearance when compared to ordinary oat glass. It is therefore the only clear Advantages glass which allows a natural and true representation...

SGG DIAMANT is available in 15 and 19 mm for the production of large glass surfaces. Installation SGG DIAMANT must be installed according to regulations and recommendations of use. Processing DIAMANT can be used as the base product for a wide range of processed products: SGG • Laminated options: safety glass STADIP, STADIP PROTECT, STADIP PROTECT bulletproof, also available in the non-reective version SGG VISION-LITE. • Monolithic toughened safety glass SECURIT, heat strengthened glass PLANIDUR, as well as high performance safety glass for structural glazing systems SECURIPOINT. • Screen printed...

Physical properties • Mechanical and sound absorption properties are identical to those of SGG PLANILUX. • Higher level of light transmittance compared to SGG PLANILUX. Light transmission Energy factor Solar factor Shading Coefcient Coefcient U All the brands quoted in this brochure are either registered or trademarked by Saint-Gobain. For Glassolutions contact details by country, please refer to the last page. www.glassolutions.eu By Muchimuchi - Saint-Gobain Glass Solutions France – RCS Nanterre 447768169 - June 2011 – May be subject to change

Coloured decorative glass with relief

Safety decorative glass thermoformed and printed for indoor and outdoor decoration Advantages CREA-LITE is manufactured by softening clear or body-tinted glass at high temperature. As a rst step, a mould is milled with a personalized relief taken from a photograph or a numerical le. The glass is then placed on the mould and heated up to 800°C. The heat forming begins when the glass softens and assumes the 3D shapes of the mould. After that operation, the glass is tempered. CREA-LITE can also be coloured by printing on glass. Powders are placed on the surface and heated with a special cycle. -...