video corpo
cad

Escape 21

Escape 21
1 / 15 PagesView full catalog

Escape 21

Product catalog summary
General Warnings:
  • Dimensions are in millimeters. Ensure proper ventilation in the spa installation area.
  • Do not transport the spa upright or lift it by its edge or pipes.
  • Ensure the installation site can support the spa's weight and has necessary technical arrangements.
  • Obtain a declaration of conformity for the building's systems before installation. The manufacturer is not liable for installations without this document.
General Norms:
  • Compliance with Low Tension Directive 2014/35/EU and other relevant standards is required.
  • Electrical and hydraulic systems must meet international and national standards.
Plumbing Installer Specifications:
  • Installation must be performed by a qualified technician.
  • Install suitable drain wells and consult local authorities for water drainage standards.
Electrical Installer Specifications:
  • Installation must be performed by a qualified technician.
  • Ensure the power supply system complies with international and national standards.
  • Install a stabilization device if electrical mains are unstable.
  • Proper earthing and equipotential connections are mandatory.
Product Power Box:
  • Check system capability to withstand appliance power.
  • Install switches with a contact gap of at least 3 mm, positioned near the appliance but out of reach of users.
Technical Data:
  • Water capacity ranges from 770 to 1400 liters depending on the model.
  • Dry weight ranges from 180 to 360 kg.
  • Filled weight ranges from 1270 to 2250 kg.
  • Maximum number of persons ranges from 4 to 7.
  • Floor load ranges from 484 to 840 kg/m².
  • Consult a structural engineer before placing the spa on an elevated deck.
See more

Catalog excerpts

Escape 21-1

1 Le dimensioni d’ingombro sono espresse in mm 2 Tolleranze dimensionali sulle misure reali ±10 mm 3 Prestare particolare attenzione alle dimensioni di ingombro dei prodotti. 4 La casa costruttrice si riserva il diritto di apportare in qualsiasi momento modifiche e migliorie al prodotto senza dare preavviso. 5 L’installazione della spa in ambienti interni richiede alcuni speciali accorgimenti. L’acqua tendera inevitabilmente a raccogliersi attorno alia spa, pertanto i materiali usati per la pavimentazione dovranno garantire buone propriety antiscivolo sul bagnato. Un corretto drenaggio e essenziale per evitare I’accumulo d’acqua attorno alia minipiscina. In caso di costruzione di un nuovo ambiente per I’installazione della spa si consiglia la realizzazione di uno scarico a pavimento. L’umidita tendera naturalmente ad aumentare con I’installazione della spa. L’acqua potrebbe penetrare negli arredi in legno con formazione di muffe, e altri inconvenienti. Controlli la presenza degli eventuali effetti provocati dall’umidita dell’aria sulle parti esposte (legno, carta, ecc.) del locale. Per ridurre al minimo questi effetti, prevedere una buona ventilazione dell’area d’installazione della spa. 2 Dimensional tolerance on real size ±10 mm. 3 Pay special attention to the overall dimensions of the products. 4 The manufacturer reserves the right to carry out product modifications and improvements at any time without prior notice. 5 Be aware of some special requirements if you place your spa indoors. Water will accumulate around the spa, so flooring materials must provide a good grip when wet. Proper drainage is essential to prevent a build-up of water around the spa. When building a new room for the spa, it is recommended that a floor drain be installed. The humidity will naturally increase with the spa installed. Water may get into woodwork and produce dry rot or other problems. Check for airborne moisture’s effects on exposed wood, paper, etc. in the room. To minimize these effects, it is best to provide plenty of ventilation to the spa area. 1 DieAuGenmaGe werden in Millimetern angegeben. 2 GroGenabweichungen gegenuber den reellen MaGen ±10 mm 3 Achten Sie insbesondere auf dieAuGenmaGe der Produkte. 4 Der Hersteller behalt sich das Recht vor, jederzeit und ohne Vorankundigung Anderungen und Verbesserungen an den Produkten vorzunehmen. 5 Die Installation des Whirlpool-Spas im Innenbereich verlangt nach einigen Sondervorbereitungen. Unvermeidlicherweise werden sich urn den Whirlpool Wbsserpfutzen bilden. Es ist daher ein rutschsicherer Bodenbelag vorzusehen. Urn das Ansammeln von Wbsserpfutzen rund urn den Whirlpool zu vermeiden, ist eine gute Entwasserung erforderlich. Bei Neubau der Whirlpool-Spa-Umgebung empfiehlt sich die Realisierung eines Bodenabflusses. Es versteht sich von selbst, dass die Feuchtigkeit mit der Whirlpool-Installation zunehmen wird. Das Wasser konnte sich in den Holzeinrichtungen einnisten, Oder Faulnisbildung fuhren und andere Unannehmlichkeiten verursachen Prufen Sie alle empfindlichen Stellen des Installationsraums (Holz, Papier usw.) auf eventuelle Feuchtigkeitsfolgen. Urn diese Auswirkungen auf ein Minimum zu reduzieren, muss der Installationsraum des Whirlpool-Spas mit einer guten Beluftung versehen sein 1 Las dimensiones estan expresadas en mm. 2 Tolerancias dimensionales en las medidas reales ±10 mm. 3 Prestar particular atencion a las dimensiones maximas de los productos. 4 El fabricante se reserva el derecho de aportar en cualquier momento modificaciones y mejorias al producto sin previo aviso. 5 La instalacion de la Spa en ambientes internos requiere algunas precauciones especiales. El agua tendera, inevitablemente, a concentrarse alrededor de la piscina y, por esto, los materiales utilizados para la pavimentacion deberan garantizar buenas propiedades antideslizantes sobre suelo mojado. Un drenaje correcto es esencial para evitar la acumulacion de agua alrededor de la piscina. En caso de construction de un nuevo ambiente para la instalacion de la Spa, se aconseja la ejecucion de un desague en el suelo. La humedad tendera naturalmente a aumentar con la instalacion de la piscina. El agua podria penetrar en los muebles de madera con formation de moho, y otros inconvenientes. Controle la presencia de los eventuales efectos provocados por la humedad del aire en las partes expuestas (madera, papel, etc.) del local. Para reducir al minimo estos efectos, hay que prever una buena ventilation del area de instalacion de la Spa. 1 Les dimensions d’encombrement sont exprimees en mm. 2 Tolerances sur les dimensions reelles ±10 mm. 3 Faire extremement attention aux dimensions d’encombrement des produits. 4 Le Fabricant se reserve le droit d’apporter, a tout moment et sans preavis, des modifications et des ameliorations au produit. 5 L’installation d’une les Spas en interieur necessite de prendre quelques precautions. L’eau aura inevitablement tendance a se deposer tout autour de la piscine et done les materiaux utilises sur le sol devront garantir de bonnes proprietes antiderapantes. Un bon drainage est essentiel pour eviter que I’eau ne s’accumule autour de la piscine. Si une construction nouvelle doit etre effectuee pour installer la mini piscine spa, il est conseille de realiser un vidage au sol. L’humidite tendra naturellement a augmenter avec I’installation de la piscine. L’eau pourrait penetrer dans le mobilier en bois en entramant la formation de moisissures ou d’autres inconvenients. Controlez les eventuels effets provoques par I’humidite de I’air sur les parties exposees (bois, papier, etc.) du local. Pour reduire au maximum ces effets, prevoir une bonne ventilation de la zone d’installation de les Spas.

 Open the catalog to page 1
Escape 21-2

REQUISITI PER L’INSTALLAZIONE DEL PRODOTTO Fare ATTENZIONEDOOHGLPHQVLRQLGHJOLLPEDOOLGHOSURGRWWRDFTXLVWDWR 9HUL¿FDUHLOSHUFRUVRSHULOWUDVSRUWRGHOSURGRWWRDOVLWRSUHVFHOWRSHUO LQVWDOOD]LRQHYHUL¿FDQGROHPLVXUHGLSRUWHVFDOHSLDQHURWWROLFRUULGRL NON trasportare mai la spa in posizione verticale! ATTENZIONE! Non sollevare MAI il prodotto per il bordo o per le tubazioni. /¶LQVWDOOD]LRQHYDHVHJXLWDGDSHUVRQDOHTXDOL¿FDWRQHOULVSHWWRGHOOHQRUPH,(& IMPORTANTE: 'DWDO¶HOHYDWDFDSDFLWjHSHVRGHOSURGRWWR YHGLQRWHWHFQLFKH qQHFHVVDULRXQRVWXGLRLPSLDQWLVWLFRHVWUXWWXUDOHVSHFL¿FR /¶LQVWDOODWRUHGHYHDVVLFXUDUVLSUHYHQWLYDPHQWHFKHLOSDYLPHQWRHRSDUHWHGRYHYHUUjLQVWDOODWRLOSURGRWWRVLDVXI¿FLHQWHPHQWHOLYHOODWRFKHQHSRVVD...

 Open the catalog to page 2

All GLASS 1989 catalogs and technical brochures

  1. Mimesi Panel

    10  Pages

  2. Steam Plus

    12  Pages

  3. hoshi

    11  Pages

  4. Nuvola Open

    3  Pages

  5. eden

    8  Pages

  6. nubea round

    8  Pages

  7. linea duo

    11  Pages

  8. mawi

    10  Pages

  9. queen

    2  Pages

  10. chloe

    2  Pages

  11. denver

    2  Pages

  12. momoa

    2  Pages

  13. Bloom

    4  Pages

  14. Meilin

    2  Pages

  15. Alchemy

    2  Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.