Environmental Product Declaration - EPD
33Pages

Environmental Product Declaration (EPD) Declaration Code: EPD-LPG-GB-28.1 Glasfabrik Lamberts GmbH & Co. KG Cast glass Patterned, solar, wired glasses and LINIT U-profiled (channel shaped) glass made by Glasfabrik Lamberts GmbH & Co. KG Basis: DIN EN ISO 14025 EN15804 Company EPD Environmental Product Declaration Publication date: 12.12.2022 Next revision: 12 December 2027 www.ift-rosenheim.de/ published EPDs

Declaration code: EPD-LPG-GB-28.1 Publication date: 12.12.2022 Product group: “Glass” Programme operator ift Rosenheim GmbH Theodor-Gietl-Straße 7-9 D-83026 Rosenheim ift Rosenheim GmbH Theodor-Gietl-Straße 7-9 D-83026 Rosenheim Declaration holder Glasfabrik Lamberts GmbH & Co. KG Egerstraße 197 D-95632 Wunsiedel Holenbrunn www.lamberts.info Declaration code Designation of declared product Cast glass Patterned, solar, wired and LINIT U-profiled glasses made by Glasfabrik Lamberts GmbH & Co. KG Architecture and façade construction This EPD was prepared on the basis of EN ISO 14025:2011 and...

Declaration code: EPD-LPG-GB-28.1 Publication date: 12.12.2022 Product group: “Glass” General product information Product definition The EPD relates to the product group “Glass” and applies to: 1 m² surface area and 1 mm thickness of cast glass from Glasfabrik Lamberts GmbH & Co. KG The LCA was prepared using the declared unit: 1 m² surface area and 1 mm thickness The functional unit is obtained by summing up: Assessed Glass Surface area reference product* thickness LINIT U-profiled glass refined 1 m² 7 mm P23/60/7 LINIT U-profiled 1 m² 7 mm glass P23/60/7 Wired glass 1 m² 6 mm Weight per...

Declaration code: EPD-LPG-GB-28.1 Publication date: 12.12.2022 Product group: “Glass” Product description The production of all glass units made by Lamberts is based on the rolled glass process in accordance with EN 572. All glass units feature at least one, sometimes two patterned glass surface(s). Patterned glass and LINIT U-profiled glass are available as standard green and low iron glass melts, solar glass only as low iron glass melt and wired glass only as standard green glass melt. Lamberts LINIT U-profiled glass The "U-shaped" cast glass channels are installed as single, double or...

Declaration code: EPD-LPG-GB-28.1 Publication date: 12.12.2022 Product group: “Glass” Product manufacture Lamberts cast glass, be it flat glass or "U"-shaped channel glass, is used by architects and designers to enhance both the aesthetics of a building and the lighting effects produced by the glass surfaces, and to improve also various technical functions of the façades . Lamberts architectural design glass is used in the interior and exterior of buildings. Lamberts LINIT U-profiled glass is mainly installed in large-scale façades. The range of projects includes production halls and...

Declaration code: EPD-LPG-GB-28.1 Publication date: 12.12.2022 Product group: “Glass” Materials used Primary materials The primary materials used are listed in the LCA (see Section 7). Declarable substances The product contains no substances from the REACH candidate list (declaration dated 22 June 2022). All relevant safety data sheets are available from Glasfabrik Lamberts GmbH & Co. KG. Construction process stage Processing recommendations, installation Observe the instructions for mounting/installation, operation, maintenance and disassembly, provided by the manufacturer. See...

Declaration code: EPD-LPG-GB-28.1 Publication date: 12.12.2022 Product group: “Glass” The reference service life (RSL) does not reflect the actual life span, which is usually determined by the service life and the refurbishment of a building. It does not provide any indication of durability, nor does it constitute a warranty with regard to the product's performance characteristics, nor any kind of guarantee. End-of-life stage Possible end-of-life stages The cast glass is shipped to central collection points. There the products are generally shredded and sorted into their original...

Declaration code: EPD-LPG-GB-28.1 Publication date: 12.12.2022 Product group: “Glass” are not more than 4 years old. No other generic data were used for the calculation. Data gaps were either filled with comparable data or conservative assumptions, or the data were cut off in compliance with the 1% rule. The life cycle was modelled using the “GaBi” sustainability software tool for the development of life cycle assessments. Scope / system boundaries The system boundaries refer to the supply of raw materials and purchased parts, manufacture/production, use and end-of-life stage of cast glass....

Declaration code: EPD-LPG-GB-28.1 Publication date: 12.12.2022 Product group: “Glass” Life cycle stages The Annex shows the entire life cycle of cast glass. The product stage "A1 – A3", construction process stage" A4 – A5", use stage "B1 – B7", end-of-life stage "C1 – C4" and the benefits and loads beyond the system boundaries "D" are considered. The below benefits have been defined as per DIN EN 15804: • Benefits from recycling • Benefits (thermal and electrical) from incineration The manufacture of the product does not give rise to any allocations. Allocations for re-use, recycling and...

Declaration code: EPD-LPG-GB-28.1 Publication date: 12.12.2022 Product group: “Glass” Raw material / pre-products The chart below shows the share of raw materials/pre-products in %. Figure 1: Percentage of individual materials per declared unit Mass in % PG 1 PG 2 PG 3 46.77 47.38 46.62 Batch 24.13 24.45 24.06 Pre-consumer cullet 27.81 28.17 27.72 Post-consumer cullet 1.28 0.00 0.00 Ceramic coating 0.00 0.00 1.60 Wire Table 3: Percentage of individual materials per declared unit Material Ancillary materials and consumables The ancillary materials and consumables used per 1 m² surface area...