- Catalogs
- GfA-Dichtungstechnik Joachim Hagemeier GmbH
- Catalogue chapter wooden windows / doors
Catalogue chapter wooden windows / doors
Catalogue chapter wooden windows / doors
Overview
This technical catalogue chapter from GfA-Seal Systems focuses on sealing profiles designed specifically for wooden windows and doors. It covers product specifications, categorization by notch height, installation procedures, material types, ordering instructions, and legal considerations.
1. Introduction to Sealing Profiles
The document outlines the evolution of sealing technology from simple single-level seals to advanced multi-level sealing systems that meet modern standards such as noise protection and passive house requirements. It highlights the increasing complexity of sealing geometries enabled by advanced milling equipment and the need for diverse profile options.
2. Categorization of Sealing Profiles
Sealing profiles are primarily categorized by notch height to facilitate selection based on window or door design. The main notch height categories include:
- 10mm (Rubric 01)
- 12mm (Rubric 02)
- 15mm (Rubric 03)
- 18mm (Rubric 04)
- Other notch heights (Rubric 05)
Additional categories cover special systems such as dry glazing, flashover seals, lifting and sliding doors, cross-sills, frame and corner production, and special sealing profiles.
3. Product Specifications and Features
Each category lists multiple sealing profiles identified by product codes (e.g., ADTP-272-CC, ADTP-2958) with detailed parameters including:
- Notch width ranging from 2.5mm to 7mm
- Head width typically between 7.5mm and 11.5mm
- Material types such as elastic PVC, semi-rigid PVC (Shore A 85), silicone rubber (various Shore A hardness), and TPE (Shore A 80)
- Special design features like tear-off parts, oversize heads, coated cords for enhanced sealing
Profiles also include cushion seals and center seals for two-winged windows, with options for multiple colors including black, grey, light oak, beige, brown, white, and transparent.
4. Installation Procedures and Assembly
Sealing frames can be assembled by welding or using special corners. The assembly process involves installing corners first, then applying bulk stock material with an approximate 1% length add-on for fitting. Abutting edges of sealing profiles must be bonded using primer GB-425 and special glues GB-432 or GB-433. Principle drawings and diagrams (not to scale) illustrate measuring points and assembly steps to ensure accurate installation.
5. Ordering Instructions and Customization
Ordering requires detailed specifications including company stamp, contact details, seal type, color, frame type (3-sided or 4-sided), and precise size measurements (width and height). Customers may provide a print of the required sealing profile or send a sample for determination. Minimum order quantities are 5 meters per type with a minimum order value of €30 plus VAT. Delivery includes free house delivery and packing.
Custom production dies for new sealing profiles are available starting from a minimum order quantity of 200 meters. GfA-Seal Systems’ development department offers support for custom solutions.
6. Legal and Intellectual Property Considerations
The document contains strict copyright and ownership notices prohibiting copying or distribution without explicit permission from GfA-Seal Systems. Contact information for the company headquarters in Marxen, Germany, is provided for inquiries and support.
Critical Information Summary
- Sealing profiles are categorized by notch height and head width for precise selection and fitting.
- Material options include elastic PVC, semi-rigid PVC, silicone rubber, and TPE, chosen based on application needs.
- Installation requires use of primer GB-425 and glues GB-432/GB-433 for bonding profile edges.
- Sealing frames can be assembled by welding or using special corners with a 1% length add-on for fitting.
- Ordering mandates detailed specifications and minimum quantities; custom profile manufacturing is supported.
- Technical drawings assist in accurate measurement and installation.
- Strict copyright and confidentiality restrictions apply to the document content.
Catalog excerpts
Seals for wooden windows and doors · Catalogue chapter · CAT 3 wooden windows • doors CATALOGUE CHAPTER black
Open the catalog to page 1
The bespoke tailors for seal profiles GfA-SEAL SYSTEMS
Open the catalog to page 2
3 Seals for wooden windows and doors · Catalogue chapter · CAT 3
Open the catalog to page 3
GfA-SEAL SYSTEMS
Open the catalog to page 4
WOODEN WINDOWS · DOORS Seals for wooden windows and doors · Catalogue chapter · CAT 3
Open the catalog to page 5
GfA-SEAL SYSTEMS
Open the catalog to page 6
for wooden windows and doors for other notch heights frames and corner production frames production special (profile) corners systems dry glazing in flashover for lifting and sliding doors for cross-sills special sealing profiles Seals for wooden windows and doors · Catalogue chapter · CAT 3 Sealing profiles for wooden windows and doors The time of simple wooden windows and house doors without or with only one sealing level has passed long ago. Today it is a matter of course that there are at least two, or often more, different kinds of seals used for those prefabricated building units. The subjects...
Open the catalog to page 7
WOODEN WINDOWS· DOORS for 10mm notch heights ADTP-272-CC with coated cord refer to CAT. 3 · Rubric 7 ADTP-2958 refer to CAT. 4 · Rubric 1 ADTPSR-1050 refer to CAT. 3 · Rubric 1 ADTP-501 refer to CAT. 3 · Rubric 8 ADTP-2773 refer to CAT. 3 · Rubric 1 GfA-SEAL SYSTEMS This draft may neither be copied nor passed on to third party or competitors, nor in original, nor as copy on data media without our explicit permission. We reserve ownership and copyrig
Open the catalog to page 8
GfA-SEAL SYSTEMS Wooden windows and doors • for 10mm notch heights ADTP-383 ADR-1040 ADUTP-874 ADTP-216 basic material: elastic PVC head width oversize 9,5mm for notch width of 3,0mm for notch width of 4mm for notch width of 4mm for notch width of 3mm P §? head width oversize 9,5mm with tear off part with tear off part for notch width of 2,5mm for notch width of 4mm for notch width of 4,5mm head width oversize 10mm No. 10-4 X for notch width of 2,5mm for notch width of 4mm head width oversize 10mm head width oversize 10mm with tear off part for notch width...
Open the catalog to page 9
Wooden windows and doors • for 10mm notch heights basic material: elastic PVC with tear off part for notch width of 5mm head width oversize 9,5mm head width oversize 10mm head width oversize 9,5mm for notch width of 4mm with tear off part GfA-SEAL SYSTEMS
Open the catalog to page 10
GfA-SEAL SYSTEMS ^ black grey ^ light oak beige brown Q white ^ ; transparent SCALE 1:1 11
Open the catalog to page 11
WOODEN WINDOWS· DOORS for 12mm notch heights ADTP-2958 refer to CAT. 4 · Rubric 1 ADTP-1248 refer to CAT. 3 · Rubric 2 ADTP-501 refer to CAT. 3 · Rubric 8 ADTP-2773 refer to CAT. 3 · Rubric 1 GfA-SEAL SYSTEMS This draft may neither be copied nor passed on to third party or competitors, nor in original, nor as copy on data media without our explicit permission. We reserve ownership and copyrig
Open the catalog to page 12
GfA-SEAL SYSTEMS with tear off part with tear off part for notch width of 4mm for notch width of 4,5mm CUSHION-seal CUSHION-seal ADUTP-1230 ADR-1240 basic material: elastic PVC head width oversize 6,5mm for notch width of 3mm for notch width of 4mm for notch width of 4mm for notch width of 4,5mm ADUTP-875 head width oversize of 9,5mm basic material: elastic PVC for notch width of 4mm for notch width of 4mm for notch width of 4,5mm head width oversize of 10mm DOOR INSERTING DEVICE GB-201 • Category 19 12mm rebate with tear off part for notch width of 4mm black grey light oak...
Open the catalog to page 13
Wooden windows and doors • for 12mm notch heights basic material: elastic PVC basic material: elastic PVC for notch witdth of 5mm with tear off part with tear off part for notch width of 5mm basic material: elastic PVC head width oversize 10mm head width oversize 9,5mm for notch width of 5mm ADÜTP-1248-CC with coated cord head width oversize 9,5mm for notch width of 5mm head width oversize 10mm GfA-SEAL SYSTEMS with tear off part for notch width of 5mm basic material: silicone rubber basic material: silicone rubber head width oversize 10mm for notch width of 5mm head width oversize 11,5mm head...
Open the catalog to page 14
Wooden windows and doors • for 12mm notch heights GfA-SEAL SYSTEMS with coated cord basic material: elastic PVC with tear off part for 5mm notch width notch width oversize of 5,5mm for notch width of 5mm for notch width of 5mm You did not find your profile? You will find our inquiry form under category 20. black grey light oak beige brown white transparent
Open the catalog to page 15
WOODEN WINDOWS DOORS-for 15mm notch heights / ^ c \ ADUSL-1551 refer to CAT. 3 ■ Rubric 3ADUTP-1551 refer to CAT. 3 ■ Rubric 3 SCALE 1:1 This draft may neither be copied nor passed on to third party or competitors, nor in original, nor as copy on data media without our explicit permission. We reserve ownership and copyright.
Open the catalog to page 16
Wooden windows and doors • for 15mm notch heights GfA-SEAL SYSTEMS with tear off part for notch width of 3mm for notch width of 4mm head width with oversize 9,5mm for notch width of 4mm for notch width of 4,5mm ADTP-1530 ADTPSUFR-1540 ADTP-1541 head width oversize 10mm with tear off part for notch width of 5mm for notch width of 4mm for notch width of 4mm ADSL-1530 basic material: silicone rubber No. 15-4 X for notch width of 3mm for notch width of 5mm for notch width of 4mm for notch width of 4mm DOOR INSERTING DEVICE GB-212 • Category 19 15mm cushion ^ black grey...
Open the catalog to page 17
GfA-SEAL SYSTEMS Wooden windows and doors • for 15mm notch heightsADR-1550 ADTP-1503 ADTP-2723 ADTPOSH-1550 basic material: elastic PVC changed to ADTP-1502 for 2-winged windows without dibble for notch width of 5mm for notch width of 5mm for notch width of 5mm for notch width of 5mm ADTPSR-1550 ADTP-1502 ADTP-3428 bottom foot to tear off with tear off part also applicable for 18mm notch height head width 7,5 mm for notch width of 5mm for notch width of 5mm for 5 mm notch width ADUSL-1550 ADUTP-1551 basic material: silicone rubber CENTER SEAL for 2- wings...
Open the catalog to page 18All GfA-Dichtungstechnik Joachim Hagemeier GmbH catalogs and technical brochures
Catalogue chapter accessories14 Pages
Catalogue chapter special seals28 Pages
Catalogue chapter showers16 Pages
Main Catalogue552 Pages
