Weight / Mass per unit area EN 430 g/sqm 1510 Surface treatment - - Diamalite Norm / Product specification - - EN 653 European classification EN 685 class 22 Fire rating - Classification EN 13501-1 class Cf|-s1 Wear group EN 653 group T VOC rate (French norm) - - A+ German norm Agbb - - OK Impact sound insulation EN ISO 717/2 dB 19 Room impact noise NFS 31074 class A Dimensional stability after exposure to heat EN 434 % 0.05 Colour fastness EN 20 105-B02 degree >6 Static electrical propersity NF EN 1815 < 2 kV < 2 kV ^UiaiTialite Diamalite is a special additive within the wear-layer that makes cleaning easier.

A clear PVC wear-layer A printed, textured, expanded PVC layer A reinforced fiber-glass interlayer for dimensional stability An extra layer of foam cushioning for additional comfort underfoot LAYING The subfloor must be smooth, clean, dry, undamaged and flat. Recommendations: unroll the floorcovering 24 hours before laying. The floor covering should not be laid in a room if the temperature is below 15°C. Laying on underfloor heating is possible (up to 28°C). Weld the joints (cold-treatment product) to ensure good water-tightness. If permanent laying with glue: use a single stick acrylic adhesive...