Diamalite Total thickness Thickness of the wear layer Weight: Mass per unit area Surface treatment Norm / Product specification European classification Fire rating - Classification Wear Group VOC rate (French norm) German norm Agbb TVOC rate 28 days Impact sound insulation Room impact noise Slip resistance wet: ramp test with oil Dimensional stability Residual indentation Thermal conductivity Floor heating Colour fastness Static electrical propersity Guarantee

Wear layer Pureclean finish Patterned foam Fibreglass interlayer Anti-mildew bonding layer Fibre backing, over 95% recycled fibres The subfloor must be smooth, clean, dry, undamaged and flat. Recommendations: unroll the floorcovering 24 hours before laying. Floor covering should not be laid in rooms at a temperature is below 15°C. Can be installed on underfloor heating (up to 28°C). Weld the joints (cold-treatment product) to ensure good water-tightness. Best value for money Recommended laying methods: l Loose laying without glue: up to 25 sq. m l Laying without glue, with double-sided tape or...