Catalogs >
Gerflor - Contract Sport & Contract Flooring >
Booster

Booster
2Pages

Catalog excerpts

Total thickness Weight / Mass per unit area TVOC rate 28 days VOC rate (French norm) Impact sound insulation Room impact noise Slip resistance wet: ramp test with oil Surface treatment Norm / Product specification European classification Fire rating - Classification Wear group Dimensional stability after exposure to heat Residual indentation Thermal conductivity Colour fastness Wet rooms Floor heating Static electrical propersity Guarantee

Open the catalog to page 1

Wear-layer TopFinish treatment A printed, textured, expanded PVC layer A reinforced fiber-glass interlayer for dimensional stability An extra layer of foam cushioning for additional comfort underfoot LAYING The subfloor must be smooth, clean, dry, undamaged and flat. Recommendations: unroll the floorcovering 24 hours before laying. The floor covering should not be laid in a room if the temperature is below 15°C. Laying on underfloor heating is possible (up to 28°C). Weld the joints (cold-treatment product) to ensure good watertightness. BOOSTER INSTALLATION WITH ACRYLIC GLUE If permanent...

Open the catalog to page 2